Shropshire · England

Bath & shower resealing (mastic) in Ellesmere, Shropshire

Bath, shower and sink resealing with new mould-resistant silicone in Ellesmere, carried out at your home and guaranteed for a year.

  • Missing sealant behind the taps
  • Sealant that is split or lifting
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Ellesmere?

Landlord and trade work in Ellesmere

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

About our bath resealing in Ellesmere

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. We’re often asked to fix missing sealant behind the taps and gaps in the seal, in wet rooms, baths and kitchen worktops & sinks.

A one-year guarantee comes as standard, so you are covered after the visit.

Roll-top bath being refinished by a Surface Doctor technician
Where
Ellesmere (SY12)
County
Shropshire
Cover
12 months on all our work
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Our work in Ellesmere

Ellesmere is about 7 miles north-east of Oswestry, in Shropshire. Wherever you are in the SY12 postcode area, we carry out the work at your property. Ellesmere is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 35 miles away.

Jobs in SY12 are booked in the same way as anywhere else. Whether you live on Market Street, High Street and Trimpley Street or anywhere nearby, we can come to you. You’ll find Ellesmere on the A495 and A528, so it’s easy for us to reach. Close by, we cover Welshampton (2 miles east), Breaden Heath (3 miles east), Balmer Heath (3 miles east), Maelor South (3 miles north-east) and Sandy Lane (3 miles north). Further out, we also cover Shrewsbury (15 miles south-east), Oswestry (7 miles south-west), Coleham (15 miles south-east), Kingsland (15 miles south-east), Whitchurch (10 miles north-east) and Monkmoor (15 miles south-east).

Landmarks near Ellesmere

Typical jobs here are in homes near Lakelands Academy, Cambrian Inn Public House and St Mary's Church. Nearby too are Ellesmere Primary School (less than half a mile west) and Lakelands Academy (within half a mile south-west). Further afield, we also cover the area around Ellesmere Castle (less than half a mile east) and Penley Community Hospital (3.4 miles north). The countryside around Ellesmere includes The Mere.

Map of Ellesmere © OpenStreetMap contributors

How to care for the repair

Simple care helps the repair last. Our advice:

  • Open a window after bathing
  • Keep the joints dry
  • Reseal when black spots won’t clean off
  • Store bottles on a shelf

Let it cure fully before using the bath or shower, normally around 24 hours.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Why reseal now?

Sealing over old silicone is a false economy. It soon peels, and traps mould underneath. A proper reseal removes the old first. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why Ellesmere customers choose us

  • No need to remove anything
  • No extra charge for your area
  • Typically one visit, start to finish
  • We leave the room as we found it

Take a look at our full price list.

How the visit works

We agree an arrival time beforehand. Once we are there, the work takes about two hours for a bath for most jobs. The room is left tidy and you will know when it can be used.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

How to prepare

  • Keep pets and children out of the room while we work
  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park

Getting a price

For a price in Ellesmere, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Related advice

What a repair can’t fix

A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:

  • Loose tiles, which need refixing first
  • Very wide gaps that need a trim
  • Rotten walls or floors behind the bath

Send us photos and we will tell you honestly before you book.

Materials we work on in Ellesmere

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units

Common questions in Ellesmere

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

How do I stop mould in sealant?

Mould needs moisture. Ventilation and drying keep it clean longer.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Signs you need bath resealing in Ellesmere

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

The most common problems we are called about are:

  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
  • Silicone smeared on tiles
  • Gaps by the taps

Before booking anyone

  • What preparation is included
  • How changes to the job are handled
  • How the room is protected while they work
  • The length of the guarantee and what it covers

Choosing a repair company

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Prices and what affects them

We give every job a fixed quote from pictures. This is what makes a difference:

  • How many items we do on one visit
  • How much damage there is
  • The type of damage
  • How hard the colour is to match

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

When you take your pictures, a few simple things make all the difference:

  • One picture of the whole bath or shower
  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size
  • Good light, ideally daylight, without flash glare

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, include your postcode and send them to us. You will get a fixed quote, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.