Somerset · England

Bath & shower resealing (mastic) in Ford, Somerset

Local bath resealing for Ford: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Water getting behind the bath or tray
  • Missing sealant behind the taps
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Ford?

About our bath resealing in Ford

We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. If you’re dealing with old sealant that looks dirty and silicone coming away from the tiles, we can help, whatever the material.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Location
Ford (TA4)
County
Somerset
Guarantee
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Honest limits

A few problems are outside what a surface repair can do:

  • Gaps too big for silicone alone
  • A bath or tray that moves, until its support is fixed
  • Hidden water damage

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Wet rooms
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Baths
  • Basins & vanity units

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Prices and what affects them

We don’t charge extra for travel to Ford. The price depends on:

  • How hard the colour is to match
  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • The material and finish

The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.

Quotes from your photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • The material, if you know it

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Questions from Ford

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Why does the silicone keep cracking?

Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

Do you work in Ford?

Yes. We cover the entire UK and travel to Ford. Send pictures and we will quote, or call 0345 017 0787.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

What does bath resealing cost?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

How do I stop mould in sealant?

Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

About Ford

Ford is about 6 miles north-west of Wellington, in Somerset. We travel to homes and businesses in Ford, so you do not need to take anything anywhere. Our repair technicians cover 640 places in Somerset.

Here we cover the TA4 postcode area. We also travel to Fitzhead (2 miles east), East Town (2 miles north), Tolland (2 miles north), Milverton (2 miles south-east) and Westowe (3 miles north-east). Larger places within reach include Taunton (9 miles east), Bridgwater (14 miles east), Minehead (13 miles north-west), Wellington (6 miles south-east), Sydenham (15 miles east) and Wilton (9 miles east).

Around Ford

Our clients here include homes close to Wiveliscombe Primary School, Kingsmead School and The Bear Inn, among other places. Further afield, we also cover the area around Merrifield Children's Unit (4.7 miles east).

Map of Ford © OpenStreetMap contributors

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, for the same reason.

Baths

We fill the bath before sealing, so the joint is at its widest.

How the visit works

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for about two hours for a bath. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

How to get a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Get a fixed quote

Read more

Signs you need bath resealing in Ford

In time, even good sealant discolours. Steam, soap and movement all take their toll.

These are the problems we are asked about most:

  • Water getting behind the bath or tray
  • Missing sealant behind the taps
  • Silicone coming away from the tiles
  • Black mould in the sealant

What your quote should include

  • What aftercare is recommended
  • Whether they match the colour on site
  • A fixed quote, and whether VAT is included
  • When it can be used again

Choosing a repair company

Why reseal now?

Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • We come to you, anywhere in the UK
  • One price list for the entire UK
  • Nothing taken out or refitted
  • Free fixed quotes from pictures

Take a look at our pricing.

Looking after it afterwards

How the surface is treated afterwards matters:

  • Air the room after use
  • Keep the joints dry
  • Reseal when black spots won’t clean off
  • Run the extractor fan during and after showers

Good ventilation is the best protection, and wipe the joints after use.

Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.