Caerphilly · Wales

Bath Resealing for Gelligaer homes

Bath resealing for Gelligaer, without a refit. Get a fixed price from your pictures, then book a visit.

  • Water getting behind the bath or tray
  • Stained silicone
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Gelligaer

Bath resealing at your home in Gelligaer

A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. Whether it’s silicone coming away from the tiles and black spots in the silicone, we can usually put it right, whatever the material.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Gelligaer (CF82)
County
Caerphilly
Cover
12 months on all our work
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes a couple of hours.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Make sure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children

Getting a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.

Send photos for a quote

Read more

What we can’t put right

A repair isn’t right for every job, for example:

  • Tiles that move, until they’re refixed
  • Gaps so wide they need filling or trims before sealing
  • A bath or tray that moves, until its support is fixed

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Baths

What affects the price in Gelligaer

Every quote is fixed and free. What we take into account:

  • The size and number of damaged areas
  • How many items we do on one visit
  • Unusual colours or finishes
  • The material

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • Where you are, by postcode
  • Natural light rather than flash
  • Any earlier repairs or coatings
  • One sharp close-up of the damage

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Gelligaer questions

How long will it take?

Typically a couple of hours, plus curing time.

Why does mould come back so fast?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Do you seal over the old sealant?

We always remove the old sealant completely. Fresh silicone does not stick to old.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

What happens after I send photos?

You will get a fixed quote back, usually with dates to choose from. You are under no obligation.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

About Gelligaer

Gelligaer is about 5 miles east of Mountain Ash, in Caerphilly. We travel to homes and businesses in Gelligaer and the surrounding area, so nothing has to leave your home. Gelligaer is one of 94 towns and villages in Caerphilly where we work. Our nearest city page is Birmingham, about 80 miles away.

Every address in CF82 is covered. You will find streets such as Church Road, Heol Edward Lewis and Greenhill Place, all of which we cover. Being close to the B4254, Gelligaer is simple for us to get to. Neighbouring places we cover include Penybryn (1 mile south-east), Pen-pedair-heol (1 mile north-east), Cefn Hengoed (1 mile south-east), Llancaiach (1 mile south-west) and Tir-y-berth (1 mile east). Further out, we also cover Caerphilly (6 miles south), Risca (8 miles south-east), Pontllanfraith (3 miles east), Trecceln (5 miles east), Newbridge (5 miles east) and Beddau (6 miles south).

Local landmarks in Gelligaer

Typical jobs here are in homes near Greenhill Primary School, Harp Inn and St Catwg's Church and the streets around them. For rail, the closest station is Pengam station, roughly 1.1 miles east. Nearby you’ll also find Twyn Castell (within half a mile east) and Llancaiach Fawr Living History Museum (1.2 miles west). Not far away are Parc Coetir Bargoed.

Map of Gelligaer © OpenStreetMap contributors

Landlord and trade work in Gelligaer

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

If you manage property in Gelligaer, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Looking after it afterwards

So the finish stays in good condition:

  • Wipe the joints dry after use
  • Store bottles on a shelf
  • Reseal at the first sign of lifting
  • Clean the sealant gently and regularly

Avoid scraping the joints, and keep shampoo bottles off the joints.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Signs you need bath resealing in Gelligaer

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

Common reasons people in Gelligaer contact us include:

  • Leaks at the edges
  • An untidy old seal
  • Discoloured, yellow sealant
  • Gaps in the seal

Questions to ask before booking

  • Who turns up on the day
  • How changes to the job are handled
  • Whether they match the colour on site
  • How to care for the finish

Our hiring checklist

Why it’s worth resealing in Gelligaer

Resealing is a small job. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why choose Surface Doctor in Gelligaer

  • CHAS and Constructionline accredited
  • We’ll tell you if it’s not worth repairing
  • No extra charge for your area
  • Every repair guaranteed for a year

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.