Telford and Wrekin · England
Bath & shower resealing (mastic) in High Ercall, Telford and Wrekin
Local bath resealing for High Ercall: photo quotes, tidy work and a year’s guarantee.
- Sealant that’s split or lifting
- Gaps by the taps
- Stained silicone
Bath resealing at your home in High Ercall
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why so many DIY reseals peel. Our repair technicians work on shower trays & enclosures, baths and basins & vanity units, and common reasons people get in touch are damp near the bath and black spots in the silicone.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- High Ercall (TF6)
- County
- Telford and Wrekin
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath resealing
You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- What kind of damage it is
- The material and finish
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Two or three clear photos are generally enough. Try to include:
- Something in shot to show the size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any details about the material
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Towns and villages near High Ercall
Also in High Ercall
When to call us in High Ercall
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Signs it’s time to call us include:
- Water getting behind the bath or tray
- Discoloured, yellow sealant
- Black mould in the sealant
- A messy previous reseal
Before booking anyone
- Aftercare advice
- Who turns up on the day
- How soon you can use it again
- Whether the price covers travel
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A flexing bath
- Very wide gaps that need a trim
- Rotten walls or floors behind the bath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
Landlords, agents and businesses in High Ercall
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Resealing in High Ercall: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- No extra charge for your area
- Dust sheets down, tidy finish
- A fixed quote before you book
- Honest advice, even when it means no job
Take a look at our prices page.
Where we work around High Ercall
High Ercall is about 7 miles north-east of Shrewsbury, in Telford and Wrekin. From the centre of High Ercall to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. High Ercall is one of 79 towns and villages in Telford and Wrekin where we work. Our nearest city page is Birmingham, about 36 miles away.
We work across TF6. From Church Road, Shop Lane and Cleveland Avenue or anywhere nearby, a technician can come to you. Other places close to High Ercall include Walton (1 mile north), Rodington Heath (2 miles south), Roden (2 miles south-west), Rodington (2 miles south) and Somerwood (2 miles south-west). We also work in nearby towns such as Telford (7 miles south-east), Wellington (5 miles south-east), Dawley (8 miles south-east), Oakengates (8 miles south-east), Newport (10 miles east) and The Rock (8 miles south-east).
What’s near High Ercall
In High Ercall, that means homes near High Ercall Primary School and St Michael's Church, among other places. Nearby you will also find Princess Royal Hospital (4.8 miles south-east) and Charlton Castle (3.9 miles south). Green spaces nearby include Haughmond Hill.
Common questions in High Ercall
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does silicone take to cure?
Generally after around 24 hours. We confirm before we leave.
How much does bath resealing cost in High Ercall?
Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Are there extra charges for High Ercall?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes a couple of hours in most cases. We leave the room clean.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Before we arrive
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Dry the seal after bathing
- Clean the joints with a mild cleaner
- Let steam out after showers
- Reseal when black spots will not clean off
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
