Staffordshire · England

Bath Resealing for Hilderstone homes

Bath resealing for Hilderstone, without a refit. Get a fixed quote from your photos, then book a visit.

  • Gaps by the taps
  • Black mould in the sealant
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Hilderstone?

Bath resealing in Hilderstone without replacing anything

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We are often asked to fix old sealant that looks dirty and a messy previous reseal, in basins & vanity units, kitchen worktops & sinks and shower trays & enclosures.

Whatever the size of the job, you get the same one-year guarantee.

Location
Hilderstone (ST15)
County
Staffordshire
Guarantee
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How it works

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow around two hours, and we will tell you if anything changes.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can

Get a quote

Most clients in Hilderstone get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Advice

Hilderstone questions

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What does bath resealing cost?

Because every job differs, we price from photos. You will get a fixed figure before you book.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is the work guaranteed?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Where we work around Hilderstone

Hilderstone is about 3 miles east of Stone, in Staffordshire. Across the ST15 area, we come to you. Hilderstone is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 31 miles away.

Every address in ST15 is within our area. Whether you live on Barnscroft, Hilderstone Road and The Meadows or a nearby road, we can come to you. We also cover the places around Hilderstone: Mosslane (1 mile north), Mossgate (1 mile north), Spot Acre (1 mile north), Fulford (2 miles north) and Saverley Green (3 miles north-east). Within a short drive, we also cover Stafford (7 miles south), Newcastle-under-Lyme (10 miles north-west), Cannock (15 miles south), Longton (6 miles north-west), Rugeley (12 miles south-east) and Stone (3 miles west).

Local landmarks in Hilderstone

Our customers here include homes close to Christ Church. For rail, the closest station is Stone station, roughly 3.2 miles west.

Map of Hilderstone © OpenStreetMap contributors

Landlord and trade work in Hilderstone

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Do you need bath resealing in Hilderstone?

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

The most common problems we’re called about are:

  • Missing sealant behind the taps
  • Discoloured, yellow sealant
  • Black spots in the silicone
  • An untidy old seal

Before you book anyone

  • What the guarantee covers, and for how long
  • What preparation is included
  • If travel is included in the price
  • What aftercare is recommended

Choosing a repair company

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Honest limits

We will always be straight with you, so here’s what a repair can’t fix:

  • Gaps too big for silicone alone
  • A flexing bath
  • Loose tiles, which need refixing first

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks

Why it’s worth resealing in Hilderstone

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.

Why us?

  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • Fixed prices from your photos
  • Honest advice, even when it means no job

See our prices page.

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Reseal when black spots won’t clean off
  • Don’t stand toiletries on the seal
  • Wipe the joints dry after use
  • Clean the joints with a mild cleaner

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.