Cheshire West and Chester · England

Bath & shower resealing (mastic) in Kingsmead, Cheshire West and Chester

Bath resealing in Kingsmead without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Old sealant that looks dirty
  • Leaks at the edges
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Kingsmead

Materials and what they mean for the repair

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Bath resealing at your home in Kingsmead

Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they protect the walls and floor. We are frequently asked to fix old sealant that looks dirty and an untidy old seal, across kitchen worktops & sinks, baths and shower trays & enclosures.

You get a one-year guarantee, the same in Kingsmead as everywhere else we work.

Where
Kingsmead (CW9)
Area hub
Cheshire West and Chester
Cover
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What bath resealing costs

We do not charge extra for travel to Kingsmead. The price comes down to:

  • The type of damage
  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it
  • The size and number of damaged areas

Our prices are the same across the UK, so there’s no premium for Kingsmead. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • A photo taken from further back
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size

Email us a photo of the damage and one of the entire item, with your CW9 postcode, and we’ll reply with a fixed price.

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Dry the seal after bathing
  • Reseal at the first sign of lifting
  • Store bottles on a shelf
  • Open a window after bathing

Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.

Where we work around Kingsmead

Kingsmead is about 1 mile south of Northwich, in Cheshire West and Chester. We travel to clients in Kingsmead and nearby villages, so you don’t need to take anything anywhere. We cover 224 places in Cheshire West and Chester, from the larger towns to small villages. Our jobs stretch from Kingsmead to Manchester (about 20 miles away).

We work across CW9. Whether you live on Registry Close, Shavington Way and Waverton Close or anywhere nearby, we can come to you. Other places close to Kingsmead include Davenham (1 mile south), Leftwich (1 mile north-east), Greenbank (1 mile north-west), Hartford (1 mile west) and Northwich (1 mile north). Larger places within reach include Winsford (4 miles south), Frodsham (9 miles north-west), Hoole (15 miles west), Newtown (15 miles west), Over (4 miles south) and Wharton (3 miles south).

Near you in Kingsmead

Typical jobs here are in homes near St Wilfrid's Church, The County High School and Verdein Park. Also close by are Oddfellows Arms Public House (0.5 miles south-east), Kingsmead Primary School (less than half a mile north) and The Grange School (1.3 miles west). The nearest railway station is Greenbank station, about 0.9 miles north-west. Other landmarks nearby include Victoria Infirmary (1.4 miles north). For a walk, there’s Neumann's Flash and Marbury Reedbed Nature Reserve.

Map of Kingsmead © OpenStreetMap contributors

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Resealing in Kingsmead: why it matters

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • One visit for most repairs
  • A fixed quote before booking
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list.

Common problems we fix in Kingsmead

Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.

Common reasons people in Kingsmead contact us include:

  • Stained silicone
  • Gaps by the taps
  • Silicone coming away from the tiles
  • A messy previous reseal

Comparing quotes

  • How the room is protected while they work
  • How long it needs to cure
  • Whether the price covers travel
  • The length of the guarantee and what it covers

Choosing a repair company

How it works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We clean up when we are done and let you know when you can use it again.

  1. First we strip out every bit of the old mastic.
  2. The joint is cleaned and any mould treated.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children
  • Clear the area around the damage

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a fixed price

Advice

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Your questions about bath resealing in Kingsmead

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Can you quote from photos?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you repair several things at once?

Of course, and it normally saves money. Send pictures of everything together and we will quote them together.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.