Carmarthenshire · Wales
Bath & shower resealing (mastic) in Meidrim, Carmarthenshire
Our repair technicians come to Meidrim for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- A messy previous reseal
- Gaps in the seal
- Water getting behind the bath or tray
Bath resealing at your home in Meidrim
A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why so many DIY reseals peel. If you’re dealing with black mould in the sealant and a messy previous reseal, we can typically put it right.
Big or small, it’s backed by a one-year guarantee.
- Area
- Meidrim (SA33)
- County
- Carmarthenshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath resealing in Meidrim
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
Look out for these signs:
- Silicone smeared on tiles
- Gaps in the seal
- Black mould in the sealant
- Stained silicone
Comparing quotes
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- How the colour is matched
- How long the guarantee is and what it covers
Nearby places to Meidrim
More services for Meidrim
Covering Meidrim
Meidrim is about 7 miles west of Carmarthen, in Carmarthenshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 195 places across Carmarthenshire, from the larger towns to small villages.
Every address in SA33 is covered. That includes homes on Station Road, Drefach Road and Lon Ddewi. We also travel to Carmarthenshire (1 mile south), Bancyfelin (3 miles south-east), Sanclêr (3 miles south), Llangynin (3 miles west) and St Clears (3 miles south). Larger places within reach include Carmarthen (7 miles east), Pembrey and Burry Port Town (15 miles south-east), Achddu (15 miles south-east), Cwmoernant (8 miles east), Furnace (15 miles south-east) and Pen-sarn (8 miles east).
Local landmarks in Meidrim
In Meidrim, that means homes near New Inn and St David's Church and the streets around them. A little further out are Trefenty Castle (4.6 miles south). For a walk, there’s Penbigwrn and Cors Goch National Nature Reserve.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, for the same reason.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Very wide gaps that need a trim
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Baths
How the visit works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It generally takes about two hours for a bath, and you can get on with other things while we’re there.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Make sure the area is dry
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Common questions in Meidrim
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
How long will it take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for bath resealing in Meidrim?
We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you reseal over the old silicone?
We always remove the old sealant completely. Fresh silicone doesn’t stick to old.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
Landlord and trade work in Meidrim
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Landlords, letting agents and housing providers in Meidrim use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
What affects the price in Meidrim
We price every job individually, from your pictures. The main factors are:
- The type of damage
- Whether old repairs or coatings need taking off
- How many areas need work
- Where the damage is and how we get to it
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- A picture taken from further back
- Details of any past repairs
- A close-up of the damage, in focus
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep bottles off the joints
- Give the seal a regular clean
- Dry the seal after bathing
- Reseal at the first sign of lifting
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
