Gloucestershire · England

Bath & shower resealing (mastic) in Mill End, Gloucestershire

Fixed-price bath resealing in Mill End and the surrounding area, typically in one visit.

  • Mould you cannot clean out
  • Old sealant that looks dirty
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Mill End

What happens on the day

We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take around two hours, and we leave the room as we found it.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Mention any earlier repairs or resurfacing
  • Keep children and pets away from the room on the day

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.

Get a free quote

Advice

Bath resealing at your home in Mill End

We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Our technicians work on baths, kitchen worktops & sinks and basins & vanity units, and people most frequently call us about mould you can’t clean out and stained silicone.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Technician in a mask working on a freestanding roll-top bath
Area
Mill End (GL20)
Region
Gloucestershire
Cover
A year, on every repair
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Questions from Mill End

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

It’s been repaired before. Can you still fix it?

Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

When can I use the bath after resealing?

Normally about a day later. We’ll tell you the exact time.

My seal keeps tearing. Why?

Typically because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Where we work around Mill End

Mill End is about 3 miles north of Tewkesbury, in Gloucestershire. Our technicians come to clients in Mill End and nearby villages, so nothing has to leave your home. We cover 470 places in Gloucestershire. We work right across the region, from Mill End to Birmingham (about 32 miles away).

We cover every part of the GL20 postcode area. If you are just outside Mill End, we cover Bredon (1 mile south-east), Bredon's Norton (1 mile north-east), Bredon's Hardwick (1 mile south-west), Twyning (1 mile west) and Upper Strensham (2 miles north-west). Further out, we also cover Cheltenham (10 miles south), Gloucester (14 miles south), Tewkesbury (3 miles south), St Paul's (9 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).

What’s near Mill End

Typical jobs here are in homes near The Bredon Hancock's Endowed First School, Church of St Giles and Royal Oak Inn. For rail, the closest station is Ashchurch for Tewkesbury station, roughly 2.5 miles south of the centre. Well-known places in the area include Elmley Castle (4 miles north-east) and Tewkesbury Heritage & Visitor Centre (3.5 miles south-west). For a walk, there’s Kemerton Lake and Bredon Hill.

Map of Mill End © OpenStreetMap contributors

Honest limits

It helps to know what we cannot do:

  • Gaps too big for silicone alone
  • Hidden water damage
  • A bath or tray that moves, until its support is fixed

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms

Signs you need bath resealing in Mill End

Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.

The things customers normally mention when they call are:

  • Damp near the bath
  • Unsealed corners
  • A messy previous reseal
  • Silicone coming away from the tiles

What your quote should include

  • What preparation is included
  • Whether there are any call-out or travel charges
  • A fixed quote, and whether VAT is included
  • What happens if they find more damage

Choosing a repair company

Prices and what affects them

Prices are worked out job by job, from your photos. The main factors are:

  • The type of damage
  • Unusual colours or finishes
  • How many areas need work
  • What the surface is made of

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

Most quotes are done from photos alone. To help us price it:

  • A wider photo showing the whole bath or shower
  • A close-up of the damage, in focus
  • Natural light rather than flash
  • Something in shot to show the size

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Why it’s worth resealing in Mill End

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why Mill End clients choose us

  • One price list for the entire UK
  • Most jobs done in one visit
  • A year’s guarantee on all work
  • No need to remove anything

See our prices page.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

Keeping it looking good

Looking after the surface is easy:

  • Do not stand toiletries on the seal
  • Replace the seal when mould sets in
  • Clean the joints with a mild cleaner
  • Wipe the joints dry after use

Avoid scraping the joints, and keep shampoo bottles off the joints.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.