Luton · England
Bath & shower resealing (mastic) in New Mill End, Luton
Our repair technicians come to New Mill End for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Old sealant that looks dirty
- Mould you can’t clean out
- Unsealed corners
Bath resealing at your home in New Mill End
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. Common call-outs are for black mould in the sealant and unsealed corners, across basins & vanity units, wet rooms and kitchen worktops & sinks.
Big or small, it’s backed by a one-year guarantee.
- Where
- New Mill End (LU1)
- County
- Luton
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Where we work around New Mill End
New Mill End is about 2 miles north-west of Harpenden, in Luton. Jobs in New Mill End are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. New Mill End is one of 53 towns and villages in Luton where we work. You can also see our page for London, about 27 miles away.
Here we cover the LU1 postcode area. If you are just outside New Mill End, we cover East Hyde (1 mile south-east), Peters Green (1 mile north-east), Bower Heath (2 miles south-east), Kinsbourne Green (2 miles south-west) and Napier Park (2 miles north-west). We also work in nearby towns such as Luton (4 miles north-west), High Town (3 miles north-west), Crawley Green (3 miles north), Ramridge End (3 miles north), Bramingham (5 miles north-west) and Limbury (5 miles north-west).
Landmarks near New Mill End
Our customers here include homes close to Church of the Holy Trinity and The Stockwood Park Academy and the streets around them. The nearest railway station is Luton Airport Parkway station, about 1.9 miles north-west of the centre. A little further out are Luton Castle (2.6 miles north-west) and The Mall Luton (2.8 miles north-west). Not far away are Wheathampstead Local Nature Reserve.
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Gaps too big for silicone alone
- Hidden water damage
- A bath or tray that moves, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
Common problems we fix in New Mill End
Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.
Send us a photo if you notice any of these:
- A messy previous reseal
- Black spots in the silicone
- Gaps in the seal
- Old sealant that looks dirty
What your quote should include
- How your room will be protected
- When it can be used again
- What aftercare is recommended
- What happens if they find more damage
Prices and what affects them
You will know the full cost before you book. We look at:
- How many areas need work
- How easy the damage is to reach
- Doing more than one item at once
- What the surface is made of
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath or shower
- The material, if you know it
- One sharp close-up of the damage
To get a price, send two or three photos through our quote form or call us. We’ll say right away if a repair is the right fix.
Common questions in New Mill End
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in New Mill End.
What does bath resealing cost?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can new silicone go over old?
All the old sealant comes out. New silicone will not bond to old.
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
How do I stop mould in sealant?
Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
How long before I can shower?
Generally after around 24 hours. We confirm before we leave.
Work for landlords and builders
Landlords, letting agents and housing providers in New Mill End use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Luton and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, to open the joint fully.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Places near New Mill End
Other services in New Mill End
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take around two hours, including clearing up.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote.
Advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Run the extractor fan during and after showers
- Dry the seal after bathing
- Clean the sealant gently and regularly
- Keep bottles off the joints
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
