South Gloucestershire · England

Bath Resealing for Oldland homes

Our repair technicians come to Oldland for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Missing sealant behind the taps
  • Discoloured, yellow sealant
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Oldland?

About our bath resealing in Oldland

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We’re often asked to fix old sealant that looks dirty and unsealed corners, in basins & vanity units, wet rooms and baths.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Oldland (BS30)
Region
South Gloucestershire
Cover
A year, on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

Common questions in Oldland

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Can you reseal over the old silicone?

Never over old. The old sealant is cut out and the joint cleaned and dried.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across South Gloucestershire.

How much does bath resealing cost in Oldland?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

How long will it take?

Usually a couple of hours, plus curing time.

How long does silicone take to cure?

Typically after around 24 hours. We confirm before we leave.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Repairs by material

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, to open the joint fully.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

Looking after it afterwards

Nothing complicated is needed:

  • Give the seal a regular clean
  • Reseal when black spots will not clean off
  • Ventilate the bathroom well
  • Keep bottles off the joints

Avoid scraping the joints, and do not stand bottles on the seal.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Why it’s worth resealing in Oldland

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. We charge the same wherever you are, so there’s no premium for Oldland. The job itself decides the price: the material, the amount of damage and how many items.

Why Oldland clients choose us

  • Fixed prices from your pictures
  • We leave the room as we found it
  • Typically one visit, start to finish
  • One-year guarantee on every repair

Read our pricing.

What bath resealing costs

We price every job individually. What matters most is:

  • How many areas need work
  • The material and finish
  • Doing more than one item at once
  • Previous DIY repairs that have to come out

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

Before you send photos, these tips help us give you a firm price:

  • Natural light rather than flash
  • Something in shot to show the size
  • Where you are, by postcode
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Oldland and nearby

Oldland is about 1 mile south-east of Kingswood, in South Gloucestershire. Clients in Oldland get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in all 110 towns and villages in South Gloucestershire, from the larger towns to small villages. Our jobs stretch from Oldland to Birmingham (about 75 miles away).

Here we cover the BS30 postcode area. That includes homes on High Street, West Street and Highleaze Road. Main roads around Oldland include the A4175, so getting to you is simple. Nearby, we also work in Barrs Court (1 mile north-west), North Common (1 mile north), Cadbury Heath (1 mile west), Willsbridge (1 mile south-west) and Longwell Green (1 mile west). Further out, we also cover Mangotsfield (4 miles north), Yate (8 miles north), Fishponds (4 miles north-west), Bradley Stoke (7 miles north-west), Thornbury (12 miles north) and Patchway (8 miles north-west).

Around Oldland

Our clients here include homes close to St Anne's Church of England Primary School, Avon Valley Country Park and Queens Head pub. You will also find Sir Bernard Lovell School (under half a mile north-east), Church of St Anne (within half a mile south-west) and Digitech Studio School (1.1 miles north). The nearest railway station is Keynsham station, about 1.9 miles south-west. Well-known places in the area include Willsbridge Castle (0.7 miles south-west) and Kingswood Heritage Museum (0.8 miles north). The countryside around Oldland includes Lodge Hill.

Map of Oldland © OpenStreetMap contributors

What happens on the day

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a couple of hours from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

How to prepare

  • Have a window or extractor fan available
  • Point us to the nearest place to park
  • Ensure the area is dry

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Read more

What we are called out for in Oldland

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

Clients generally contact us about:

  • Sealant that’s split or lifting
  • Black mould in the sealant
  • A messy previous reseal
  • Unsealed corners

What your quote should include

  • Whether there are any call-out or travel charges
  • Whether cleaning and preparation are in the price
  • Aftercare advice
  • What protection goes down before work starts

10 questions to ask before you book

Landlords, agents and businesses in Oldland

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Landlords, letting agents and housing providers in Oldland use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.