Northamptonshire · England

Bath & shower resealing (mastic) in Spinney Hill, Northamptonshire

Fixed-price bath resealing in Spinney Hill and the surrounding area, usually in one visit.

  • Gaps by the taps
  • Gaps in the seal
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Spinney Hill homes

Bath resealing at your home in Spinney Hill

We reseal baths with them filled with water, so the joint opens fully, which stops the new seal tearing the first time the bath is used. Whether it’s a messy previous reseal and black spots in the silicone, we can help, on shower trays & enclosures, wet rooms and basins & vanity units alike.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Where
Spinney Hill (NN3, NN2, NN1)
Region
Northamptonshire
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Is resealing worth it?

Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • One-year guarantee on every repair
  • Dust sheets down, tidy finish
  • Free fixed quotes from pictures
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list.

What we can’t put right

A repair isn’t right for every job, including:

  • Gaps too big for silicone alone
  • Hollow or loose tiles
  • Hidden water damage

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths

FAQs for Spinney Hill

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we’ll plan for it.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

Do you cover Spinney Hill?

Yes. We work across the UK and travel to Spinney Hill. Send us photos for a fixed quote, or call 0345 017 0787.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

How to look after the repair

Once the work has cured, treat it gently:

  • Store bottles on a shelf
  • Let steam out after showers
  • Keep the joints dry
  • Clean the sealant gently and regularly

Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Signs you need bath resealing in Spinney Hill

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

Send us a picture if you notice any of these:

  • Silicone coming away from the tiles
  • Water getting behind the bath or tray
  • Black mould in the sealant
  • An untidy old seal

What your quote should include

  • How to care for the finish
  • Whether the price covers travel
  • What preparation is included
  • How the colour is matched

10 questions to ask before booking

What we do, step by step

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a couple of hours for most jobs. The room is left tidy and ready to use once it has cured.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Preparing for the visit

  • Let the surface dry out before the visit
  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Send photos for a quote

Advice

How we price bath resealing

You won’t pay by the hour. The price is based on:

  • How much damage there is
  • What the surface is made of
  • Any earlier repairs that need removing first
  • How many items we do on one visit

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Details of any past repairs
  • A close-up of the damage, in focus
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

Send us photos of the damage and a wider shot of the whole item, with your NN3 postcode, and we will come back with a fixed quote.

About Spinney Hill

Spinney Hill is about 1 mile north-east of Northampton, in Northamptonshire. We visit customers in Spinney Hill and nearby villages, so there’s no workshop to go to. We work in 364 places across Northamptonshire, from the larger towns to small villages. Our jobs stretch from Spinney Hill to Birmingham (about 46 miles away).

Jobs in NN3, NN2 and NN1 are booked in the same way as anywhere else. Whether you live on Tudor Road, The Avenue and Ryland Road or anywhere nearby, a technician can come to you. You will find Spinney Hill on the A5101, so it’s easy for us to reach. If you are just outside Spinney Hill, we cover Abington (1 mile south), Boothville (1 mile north-east), Northampton (1 mile south-west), Weston Favell (1 mile south-east) and Queen's Park (1 mile west). Within a short drive, we also cover Kettering (11 miles north-east), Wellingborough (8 miles north-east), Daventry (13 miles west), Rushden (12 miles east), Market Harborough (15 miles north) and Towcester (11 miles south-west).

Landmarks near Spinney Hill

Our customers here include homes close to St Alban's Church, Kingsley Primary School and Abington Park and the streets around them. Nearby too are Northampton School for Girls (under half a mile north-west) and Thomas Becket Catholic School (0.8 miles north-east). The closest station to Spinney Hill is Northampton station, roughly 2.2 miles south-west. Well-known places in the area include Northampton Castle (2.2 miles south-west) and Boothville (1 mile north-east). Open spaces near Spinney Hill include Bradlaugh Fields.

Map of Spinney Hill © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.