Nottinghamshire · England

Bath Resealing for Stanton Hill homes

Bath, shower and sink resealing with new mould-resistant silicone in Stanton Hill, carried out at your home and guaranteed for a year.

  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Stanton Hill homes

Bath resealing at your home in Stanton Hill

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. We are often asked to fix old sealant that looks dirty and damp near the bath, across wet rooms, shower trays & enclosures and basins & vanity units.

You get a one-year guarantee, the same in Stanton Hill as everywhere else we work.

Where
Stanton Hill (NG17)
County
Nottinghamshire
Cover
12 months on all our work
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What affects the price in Stanton Hill

Each job gets its own fixed quote. These are the things that affect it:

  • The colour and finish to match
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • The material, if you know it
  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.

Honest limits

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Hollow or loose tiles
  • Gaps so wide they need filling or trims before sealing
  • Water damage behind the bath that needs a builder

Send us photos and we’ll tell you honestly.

Materials we work on in Stanton Hill

  • Baths
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks

FAQs for Stanton Hill

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Can you quote from photos?

Nearly always. If pictures don’t show enough, we will ask for another angle.

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

What we do, step by step

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes around two hours. At the end we talk you through the curing time and the aftercare.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before

How to get a price

If you are in Stanton Hill and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

About Stanton Hill

Stanton Hill is about 1 mile north-west of Sutton in Ashfield, in Nottinghamshire. From the centre of Stanton Hill to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 329 places across Nottinghamshire. Our nearest city page is Manchester, about 45 miles away.

We cover every part of the NG17 postcode area and the streets around it. That includes homes on High Street, Welbeck Square and Morley Street and the roads around them. Other places close to Stanton Hill include Skegby (1 mile north-east), Fackley (1 mile north-west), Teversal (1 mile north), Sutton in Ashfield (1 mile south-east) and Eastfield Side (1 mile south-east). Larger places within reach include Mansfield (4 miles east), Beeston (15 miles south), Carlton (14 miles south-east), Worksop (14 miles north-east), Hucknall (8 miles south) and Mansfield Woodhouse (4 miles north-east).

Around Stanton Hill

We visit homes around All Saints' Church, Quarrydale Academy and Healdswood Infants' and Nursery School and the streets around them. The closest station to Stanton Hill is Sutton Parkway station, about 2.3 miles south-east of the centre. A little further out are Stainsby Mill (3.4 miles north-west) and King's Mill Hospital (1.9 miles east).

Map of Stanton Hill © OpenStreetMap contributors

Do you need bath resealing in Stanton Hill?

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

Signs it’s time to call us include:

  • An untidy old seal
  • Black spots in the silicone
  • Gaps by the taps
  • Damp near the bath

What your quote should include

  • Whether the colour is mixed to match
  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • How the room is protected while they work

Choosing a repair company

Why it’s worth resealing in Stanton Hill

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • One price list for the entire UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • Generally one visit, start to finish
  • We’ll tell you if it’s not worth repairing

Read our pricing.

Keeping it looking good

Once the work has cured, treat it gently:

  • Air the room after use
  • Don’t stand toiletries on the seal
  • Reseal at the first sign of lifting
  • Run the extractor fan during and after showers

Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.