Gloucestershire · England
Bath Resealing for Ullenwood homes
Fixed-price bath resealing in Ullenwood and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Water getting behind the bath or tray
- Black mould in the sealant
- Silicone smeared on tiles
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Water damage behind the bath that needs a builder
- Gaps too big for silicone alone
- A bath or tray that moves, until its support is fixed
Send us photos and we will tell you honestly.
Surfaces we repair
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
About our bath resealing in Ullenwood
We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s discoloured, yellow sealant and gaps in the seal, we can generally put it right, on baths, basins & vanity units and kitchen worktops & sinks alike.
You get a one-year guarantee, the same in Ullenwood as everywhere else we work.
- Area
- Ullenwood (GL53)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Ullenwood
Also in Ullenwood
FAQs for Ullenwood
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How do I get a price for bath resealing in Ullenwood?
Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
How long does resealing take?
Usually a couple of hours, plus curing time.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you price it without visiting?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
How it works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow a couple of hours, and we will tell you if anything changes.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Reseal at the first sign of lifting
- Don’t stand toiletries on the seal
- Run the extractor fan during and after showers
- Wipe the joints dry after use
Avoid scraping the joints, and keep shampoo bottles off the joints.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.
Signs you need bath resealing in Ullenwood
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Contact us if you’ve noticed any of these:
- Water getting behind the bath or tray
- Unsealed corners
- Discoloured, yellow sealant
- Silicone smeared on tiles
Comparing quotes
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- How to look after the finish
What bath resealing costs
Prices are worked out job by job, from your photos. What matters most is:
- The colour and finish to match
- How many areas need work
- Previous DIY repairs that have to come out
- How many items we do on one visit
Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- The material, if you know it
- A wider photo showing the entire bath or shower
If you’re in Ullenwood and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Landlords, agents and businesses in Ullenwood
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Ullenwood and nearby
Ullenwood is about 3 miles south of Lansdown, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Ullenwood is one of 470 places in Gloucestershire we cover. Our jobs stretch from Ullenwood to Birmingham (43 miles away).
Every address in GL53 is covered, from the main roads to the quietest streets. We also travel to Bentham (1 mile west), Little Shurdington (2 miles west), Shurdington (2 miles north-west), Bournside (2 miles north) and Birdlip (2 miles south-west). Larger places within reach include Cheltenham (3 miles north), Gloucester (6 miles west), Stroud (10 miles south-west), Tewkesbury (10 miles north), St Paul's (3 miles north) and Cirencester (11 miles south-east).
What’s near Ullenwood
In Ullenwood, that means homes near Cheltenham Bournside School and Sixth Form Centre and The Air Balloon pub. The nearest railway station is Cheltenham Spa station, roughly 3.1 miles north of the centre. Nearby you’ll also find Cheltenham College Museum (2.8 miles north) and Emmas Grove (0.9 miles south-west). Not far away are Cooper's Hill.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
