Suffolk · England
Bath Resealing in Walberswick
Bath resealing in and around Walberswick: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Black spots in the silicone
- Silicone smeared on tiles
- Sealant that’s split or lifting
Bath resealing at your home in Walberswick
We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We work on kitchen worktops & sinks, baths and shower trays & enclosures, and people most often call us about leaks at the edges and gaps by the taps.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Walberswick (IP18)
- County
- Suffolk
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Towns and villages near Walberswick
What else we do in Walberswick
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, for the same reason.
Walberswick and the surrounding area
Walberswick is about 11 miles south of Lowestoft, in Suffolk. From the centre of Walberswick to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 731 places across Suffolk, from the larger towns to small villages.
We cover every part of IP18. Jobs here include addresses on The Street, Palmer's Lane and Church Field. Neighbouring places we cover include Southwold (1 mile north-east), Reydon (2 miles north), Reydon Smear (2 miles north), Easton Bavents (2 miles north-east) and Wangford (3 miles north-west). Larger places within reach include Lowestoft (11 miles north), Beccles (10 miles north), Bungay (13 miles north-west), Halesworth (7 miles west), Leiston (8 miles south-west) and Carlton Colville (10 miles north).
Near you in Walberswick
Locally, our jobs take us to homes close to The Anchor pub and St Andrew's Church and the streets around them. A little further out are Alfred Corry Lifeboat Museum (0.8 miles east). Green spaces nearby include Hen Reedbeds.
What we can’t put right
Some jobs are not right for a repair, including:
- Gaps so wide they need filling or trims before sealing
- Hidden water damage
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
Why it’s worth resealing in Walberswick
Putting new silicone over old doesn’t last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- Dust sheets down, tidy finish
- Fixed prices from your pictures
- Straight answers about what a repair can do
- Generally one visit, start to finish
Read our prices page.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes about two hours for a bath. If we find something your pictures didn’t show, we will explain it before carrying on.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Clean the sealant gently and regularly
- Wipe the joints dry after use
- Store bottles on a shelf
- Use the extractor fan
Good ventilation is the best protection, and dry the joints after bathing to keep mould away.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
How we price bath resealing
There’s no charge for travel to Walberswick. The price comes down to:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Doing more than one item at once
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can generally get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
For landlords and businesses
We work for landlords, letting agents and housing providers in Walberswick as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Walberswick: your questions answered
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you quote from photos?
In nearly every case. If photos don’t show enough, we will ask for another angle.
My seal keeps tearing. Why?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first, so mention it when you send photos.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
When can I use the bath after resealing?
You’ll get the curing time from us.
About our accreditations · Every repair comes with a one-year guarantee.
