Pembrokeshire · Wales
Bath & shower resealing (mastic) in Warren, Pembrokeshire
Bath, shower and sink resealing with new mould-resistant silicone at your home in Warren, with a one-year guarantee on every repair.
- Black mould in the sealant
- Gaps by the taps
- Old sealant that looks dirty
Prices and what affects them
A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- How many items we do on one visit
- The type of damage
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- A wider photo showing the whole bath or shower
- Any details about the material
- Any earlier repairs or coatings
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job.
About our bath resealing in Warren
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We’re often asked to fix silicone coming away from the tiles and a messy previous reseal, across baths, wet rooms and basins & vanity units.
Every job is backed for twelve months in Warren and everywhere else. We return to put right any problem with the work.
- Location
- Warren (SA71)
- Region
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Warren
Warren is about 5 miles south of Milford Haven, in Pembrokeshire. Anywhere in SA71, a technician comes to you. We work in all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
We cover every part of SA71 and the streets around it. Jobs here include addresses on Windmill Lane and North Lane. We also cover the places around Warren: Axton Hill (1 mile north-east), Merrion (1 mile south-east), St Twynnells (1 mile east), Stackpole and Castlemartin (2 miles south-east) and Hundleton (3 miles north-east). Larger places within reach include Haverfordwest (11 miles north), Milford Haven (5 miles north), Pembroke (4 miles north-east), Pembroke Dock (4 miles north-east), The Marsh (11 miles north) and Dinbych-y-Pysgod (12 miles east).
Landmarks near Warren
Typical jobs here are in homes near St. Mary's Church, among other places. The nearest railway station is Pembroke station, about 4.2 miles north-east. Well-known places in the area include South Pembrokeshire Hospital (3.8 miles north) and Museum of The Home (3.9 miles north-east). Green spaces nearby include Stackpole Estate and Pembroke River lower.
Landlord and trade work in Warren
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Common questions in Warren
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
How long does a reseal take?
A bath or shower typically takes a couple of hours. It then needs time to cure.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Resealing in Warren: why it matters
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why book with us
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
Read our prices page.
Honest limits
A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:
- Movement in the bath or tray
- Tiles that move, until they’re refixed
- Rotten walls or floors behind the bath
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Warren
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
Towns and villages near Warren
Other services in Warren
Common problems we fix in Warren
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Contact us if you’ve noticed:
- Silicone smeared on tiles
- Gaps in the seal
- Mould you cannot clean out
- Discoloured, yellow sealant
What to look for in a quote
- Who will actually do the work
- The length of the guarantee and what it covers
- When it can be used again
- How the room is protected while they work
How it works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for about two hours for a bath from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We make sure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, taps included.
Getting ready for the visit
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Read more
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, for the same reason.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
