Bridgend · Wales
Bath & shower resealing (mastic) in Whiterock, Bridgend
Our technicians come to Whiterock for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Silicone smeared on tiles
- Sealant that’s split or lifting
- Water getting behind the bath or tray
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Hollow or loose tiles
- A flexing bath
- Very wide gaps that need a trim
If in doubt, send photos and we will say what we think.
What we work on
- Kitchen worktops & sinks
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
How we handle bath resealing in Whiterock
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, as one neat, continuous bead. If you’re dealing with an untidy old seal and black mould in the sealant, we can help, on kitchen worktops & sinks, wet rooms and basins & vanity units alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Whiterock (CF31, CF35, CF32)
- County
- Bridgend
- Guarantee
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes around two hours. If we find something your photos didn’t show, we will explain it before carrying on.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Other services in Whiterock
Why it’s worth resealing in Whiterock
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Whiterock clients choose us
- Everything repaired in place
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Rooms protected and left tidy
Take a look at our full price list.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Whiterock and the surrounding area
Whiterock is about 1 mile south-east of Newcastle Higher, in Bridgend. Clients in Whiterock get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Whiterock is one of 91 towns and villages in Bridgend where we work.
We work across the CF31, CF35 and CF32 postcode area. Streets in the area include Grove Road, Ewenny Road and Priory Road, all of which we cover. Whiterock is on the A48 and A473, which makes it straightforward to reach. We also cover the places around Whiterock: Hernston (1 mile south-east), Newcastle (1 mile north-west), Ewenny (1 mile south), Ewenni (1 mile south) and Corntwn (1 mile south-east). We also work in nearby towns such as Maesteg (8 miles north-west), Porthcawl (6 miles west), Ynysawdre (4 miles north), Pencoed (4 miles north-east), St Bride's Minor (3 miles north) and Sarn (3 miles north).
Local landmarks in Whiterock
Typical jobs here are in homes near Cabo Roche pub, Brynteg Comprehensive School and St.Mary Nolton Church and the streets around them. For rail, the closest station is Bridgend station, roughly 0.7 miles north. A little further out are Princess of Wales Hospital (1.5 miles north) and Oldcastle Bridgend (0.5 miles north). For a walk, there’s Cornelly Quarry Lake 2 and Brackla Hill.
- Parks and local facilities nearby include Llandow/Ewenny (2.9 miles south-east)
Do you need bath resealing in Whiterock?
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
It’s worth getting a quote if you see:
- Gaps in the seal
- Damp near the bath
- Stained silicone
- Missing sealant behind the taps
Comparing quotes
- What happens if they find more damage
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- Who will actually do the work
Prices and what affects them
We charge the same across the UK, including Whiterock. The price reflects:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for Whiterock. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
You can typically get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Any details about the material
- One sharp close-up of the damage
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
- Wipe the joints dry after use
- Clean the sealant gently and regularly
Good ventilation is the best protection, and dry the joints after bathing.
Black mould in sealant isn’t just unsightly. An early reseal keeps water where it belongs.
Whiterock questions
Why does the silicone keep cracking?
Normally because the bath or tray moves. We fill the bath before sealing it.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Which areas do you work in?
Everywhere in the UK, Whiterock included. Travel is included in the price.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
When can I use the bath after resealing?
Generally after around 24 hours. We confirm before we leave.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
About our accreditations · Every repair comes with a one-year guarantee.
