Kent · England
Bath Resealing for Wilsley Pound homes
Our technicians come to Wilsley Pound for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Damp near the bath
- Black mould in the sealant
- Gaps by the taps
Bath resealing at your home in Wilsley Pound
We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We are often asked to fix sealant that’s split or lifting and black spots in the silicone, across kitchen worktops & sinks, wet rooms and basins & vanity units.
All of our repairs are guaranteed for twelve months in Wilsley Pound and everywhere else. If something goes wrong with the work, we come back.
- Location
- Wilsley Pound (TN17)
- Region
- Kent
- Guarantee
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Resealing in Wilsley Pound: why it matters
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why us?
- Everything repaired in place
- Same prices wherever you are
- Work done at your home or business
- Every repair guaranteed for a year
See our prices page.
How we price bath resealing
We price every job individually, from your photos. What matters most is:
- How many areas need work
- What kind of damage it is
- How hard the colour is to match
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Where you are, by postcode
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
For a price in Wilsley Pound, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Aftercare tips
Once the work has cured, treat it gently:
- Do not stand toiletries on the seal
- Run the extractor fan during and after showers
- Reseal when black spots won’t clean off
- Give the seal a regular clean
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.
Landlords, agents and businesses in Wilsley Pound
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Wilsley Pound, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
About Wilsley Pound
Wilsley Pound is about 11 miles south of Maidstone, in Kent. We visit clients in Wilsley Pound, so nothing has to leave your home. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. Our nearest city page is London, about 39 miles away.
Every address in TN17 is covered, from the main roads to the quietest streets. We also cover the places around Wilsley Pound: Sissinghurst (1 mile east), Wilsley Green (1 mile south-west), Cranbrook Common (1 mile north-east), Flishinghurst (2 miles west) and Colliers Green (2 miles north-west). Within a short drive, we also cover Maidstone (11 miles north), Ashford (14 miles east), Royal Tunbridge Wells (12 miles west), Tonbridge (13 miles north-west), Kings Hill (13 miles north-west) and Foley Park (12 miles north).
Around Wilsley Pound
Around Wilsley Pound, we work in homes near Cranbrook Church of England Primary School, The Bull Public House and Church of the Holy Trinity and the streets around them. Nearby too are Cranbrook School (0.9 miles south-west) and Crane Valley (1.2 miles south-west). The nearest railway station is Staplehurst station, roughly 4.4 miles north. Well-known places in the area include Benenden Hospital (3.4 miles south-east) and Sissinghurst Castle (1.6 miles east).
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes about two hours for a bath. The room is left tidy and ready to use once it has cured.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
How to prepare
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Ask for a price
Email us a picture of the damage and a wider shot of the whole item, with your TN17 postcode, and we will come back with a fixed quote.
Related advice
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Gaps too big for silicone alone
- A bath or tray that moves, until its support is fixed
- Rotten walls or floors behind the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Wilsley Pound
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
Signs you need bath resealing in Wilsley Pound
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Typical reasons for a call-out include:
- Gaps in the seal
- Missing sealant behind the taps
- Silicone smeared on tiles
- Black spots in the silicone
Questions to ask before you book
- How to look after the finish
- What protection goes down before work starts
- What prep work is covered
- Whether they match the colour on site
Also near Wilsley Pound
Also in Wilsley Pound
Wilsley Pound: your questions answered
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How do I get a price for bath resealing in Wilsley Pound?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
About our accreditations · Every repair comes with a one-year guarantee.
