Lancashire · England
Coloured suite to white in Barton, Lancashire
We travel to Barton for resurfacing coloured baths, basins and trays in white. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A dated coloured suite you’d like in white
- Selling or letting a home with an old suite
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Any details about the material
Email us a photo of the damage and one of the whole item, with your PR3 postcode, and we will reply with a fixed quote.
Coloured bath resurfacing in Barton, done in place
Most suites take one or two days. Everything is resurfaced where it stands, with no new plumbing or tiling. Whether it’s faded or patchy colour and a dated coloured suite you’d like in white, we can generally put it right.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. Look after the new finish like a re-enamelled bath: gentle cleaners, no suction mats.
- Area
- Barton (PR3)
- Area hub
- Lancashire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need coloured bath resurfacing in Barton?
Avocado, pampas and pink suites were everywhere in the 70s and 80s, and many are still sound. The problem is normally the colour, not the bath.
It’s worth getting a quote if you see:
- Faded or patchy colour
- Selling or letting a home with an old suite
- A dated coloured suite you’d like in white
- A suite that does not match a new bathroom
What your quote should include
- Whether there are any call-out or travel charges
- Who will actually do the work
- How changes to the job are handled
- Whether cleaning and preparation are in the price
Towns and villages near Barton
What else we do in Barton
Landlords, agents and businesses in Barton
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Barton: your questions answered
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first, so let us know about it.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you do the toilet too?
Ask us. A toilet bowl is constantly wet, so we’ll advise honestly before quoting.
Can you turn my avocado bath white?
Yes. We resurface it in white with it left in place.
How do I get a price for coloured bath resurfacing in Barton?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your PR3 postcode.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a day or two, depending on how many items. If we find something your photos didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- Next we degrease everything and fix chips.
- The surface is prepared and primed.
- We spray on the new finish in white or your chosen colour.
- We leave everything to cure, typically until the day after.
Preparing for the visit
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- The inside of a toilet bowl, unless we’ve agreed it will last
- Items cracked right through
- Fittings and taps (these are masked, not recoloured)
Send us photos and we will tell you honestly.
Materials we work on in Barton
- Coloured basins
- Avocado, pampas and pink baths
- Whole bathroom suites
- Coloured shower trays
Repair or replace in Barton?
Replacing a coloured suite means a plumber, a tiler and new taps. Resurfacing turns it white without taking anything out. Our coloured bath resurfacing starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Barton clients choose us
- Nothing taken out or refitted
- One price list for the entire UK
- A year’s guarantee on all work
- Dust sheets down, tidy finish
Read our prices page or guide to resurfacing and replacement costs.
Barton and nearby
Barton is about 3 miles north of Fulwood, in Lancashire. Whether you are in the middle of Barton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 482 towns and villages in Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 30 miles away.
Jobs in PR3 are booked in the same way as anywhere else. Streets in the area include Garstang Road, Jepps Avenue and Linnet Avenue, and we cover them all. If you are just outside Barton, we cover Newsham (1 mile south-west), Cuddy Hill (1 mile west), Woodplumpton (2 miles south-west), Bilsborrow (2 miles north) and Black Pole (2 miles west). Further out, we also cover Preston (5 miles south), Lancaster (15 miles north), Chorley (13 miles south), Lytham St Anne's (12 miles south-west), Bamber Bridge (8 miles south) and Leyland (9 miles south).
What’s near Barton
Locally, our jobs take us to homes close to Broughton High School, Barton St Lawrence Church of England Primary School and Boars Head pub and the streets around them. The nearest railway station is Salwick station, roughly 4.7 miles south-west. Well-known places in the area include Preston Castle (4.5 miles south) and Royal Preston Hospital (2.8 miles south). Not far away are Grimsargh Wetlands and Beacon Fell.
About our accreditations · Every repair comes with a one-year guarantee.
