Medway · England

Coloured suite to white in Hale, Medway

Coloured bath resurfacing across Hale and nearby, typically in one visit.

  • Resurfacing from £350
  • Selling or letting a home with an old suite
  • Faded or patchy colour
Surface Doctor technician refinishing the outside of a roll-top bath

Coloured bath resurfacing near Hale

Repair or replace: which is better?

Replacing a coloured suite means a plumber, a tiler and new taps. Resurfacing turns it white without taking anything out. Our coloured bath resurfacing starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

What you get with us

  • Nothing taken out or refitted
  • No extra charge for your area
  • Colour mixed on the day to match
  • A fixed quote before booking

Take a look at our prices page and guide to resurfacing and replacement costs.

How we handle coloured bath resurfacing in Hale

A full suite is typically done in one to two days. Everything is resurfaced where it stands, with no new plumbing or tiling. We regularly repair whole bathroom suites, coloured shower trays and avocado, pampas and pink baths, and common reasons people contact us are selling or letting a home with an old suite and faded or patchy colour.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Look after the new finish like a re-enamelled bath: gentle cleaners, no suction mats.

Where
Hale (ME5)
Area hub
Medway
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What we cannot put right

A repair isn’t right for every job, for example:

  • The inside of a toilet bowl, unless we’ve agreed it will last
  • Items cracked right through
  • Fittings and taps (these are masked, not recoloured)

Send us photos and we will tell you honestly.

What we work on

  • Coloured shower trays
  • Whole bathroom suites
  • Avocado, pampas and pink baths
  • Coloured basins

What we’re called out for in Hale

Avocado, pampas and pink suites were everywhere in the 70s and 80s, and plenty are still in good condition. It’s usually the colour that dates them, not the condition.

Common reasons people in Hale contact us are:

  • A suite that doesn’t match a new bathroom
  • A dated coloured suite you’d like in white
  • Selling or letting a home with an old suite
  • Faded or patchy colour

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job
  • What aftercare is recommended
  • How the colour is matched

Our hiring checklist

Hale questions

How soon can you come?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

Can a coloured bath be made white?

Yes. It’s resurfaced in white where it stands.

Which areas do you work in?

Across the UK, and that includes Hale. Prices do not change with location.

What coloured bath resurfacing costs

Prices start from £350. There’s no charge for travel to Hale. The price comes down to:

  • How many items we do on one visit
  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • Where you are, by postcode
  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a day or two, depending on how many items. We clean up when we are done and tell you when it’s ready to use.

  1. We protect the room and ventilate it.
  2. Each item is cleaned, degreased and any chips repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray the new white (or other colour) finish.
  5. Once cured, normally by the following day, the suite is ready.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Have a window or extractor fan available
  • Tell us about any previous repairs or coatings

How to get a price

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Hale and the surrounding area

Hale is about 1 mile south-west of Gillingham, in Medway. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Hale is one of 68 places in Medway where we work. You can also see our page for London, about 30 miles away.

Every address in ME5 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Darland (1 mile south-east), Capstone (1 mile south-east), Luton (1 mile north-west), Gillingham (1 mile north-east) and Chatham (1 mile south-west). Larger places within reach include Rochester (3 miles north-west), Strood (4 miles north-west), Hoo St Werburgh (4 miles north), Rochester Riverside (3 miles north-west), Peters Village (4 miles west) and Frindsbury (3 miles north-west).

Landmarks near Hale

Typical jobs here are in homes near The Robert Napier School, The Star pub and Kingfisher Community Primary School. You will also find Chatham Grammar School for Girls (0.8 miles north), Christ Church (0.7 miles north-west), Chatham Free Library (1.4 miles north-west) and Darland Banks (0.5 miles east). The closest station to Hale is Gillingham (Kent) station, about 1.6 miles north. Well-known places in the area include Rochester Castle (2.9 miles north-west) and Pentagon Shopping Centre (1.9 miles north-west). Not far away are Blue Bell Hill and Burham Down.

Map of Hale © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.