Worcestershire · England

Non-slip bath & shower coating in Abberley, Worcestershire

We travel to Abberley for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Abberley homes

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Non-slip bath coating in Abberley without replacing anything

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with safety for older or less mobile people and resurfaced baths that are now too smooth, we can usually put it right.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Abberley (WR6)
Region
Worcestershire
Warranty
12 months on all our work
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Same prices wherever you are
  • Every repair guaranteed for a year
  • No need to remove anything
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing.

What happens on the day

We agree an arrival time beforehand. Once we are there, the work takes a few hours. The room is left tidy and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day

How to get a price

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Read more

Covering Abberley

Abberley is about 5 miles south-west of Stourport-on-Severn, in Worcestershire. Anywhere in WR6, we come to you. Abberley is one of 376 places in Worcestershire where we work. Our nearest city page is Birmingham, about 23 miles away.

Our visits in WR6 are booked in the same way as anywhere else. We regularly work on streets such as Apostles Oak, Churchfield Terrace and The Common and the roads around them. Nearby, we also work in Greenway (2 miles north), Rock (3 miles north), Heightington (3 miles north), Dunley (3 miles north-east) and Bliss Gate (3 miles north). We also work in nearby towns such as Worcester (10 miles south-east), Kidderminster (8 miles north-east), Bromsgrove (13 miles east), Great Malvern (13 miles south), Droitwich Spa (10 miles east) and Stourport-on-Severn (5 miles north-east).

What’s near Abberley

Around Abberley, we work in homes near Abberley Parochial VC Primary School, Abberley Hall School and The Manor Arms Inn and the streets around them. A little further out are Olivers Mound Castle (4.3 miles east). Green spaces nearby include Abberley Hill and Hunthouse Wood.

Map of Abberley © OpenStreetMap contributors

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • The material and finish
  • Doing more than one item at once
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A wider photo showing the whole bath or shower tray
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

For a price in Abberley, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Your questions about non-slip bath coating in Abberley

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so let us know about it.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

What happens after I send pictures?

You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

When a repair isn’t the answer

A repair is not right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

Common problems we fix in Abberley

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Before you book anyone

  • How the colour is matched
  • How soon you can use it again
  • How your room will be protected
  • What happens if the damage is worse than the pictures show

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.