Hertfordshire · England
Non-Slip Bath Coating in Ballingdon Bottom
Non-slip bath coating in Ballingdon Bottom without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
Non-slip bath coating in Ballingdon Bottom, done in place
The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. We work on enamelled baths, acrylic baths and wet room floors (ask us), and the jobs we see most are worn-out textured areas and resurfaced baths that are now too smooth.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Ballingdon Bottom (HP2)
- Area hub
- Hertfordshire
- Cover
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Ballingdon Bottom
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
Questions to ask before booking
- How soon you can use it again
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- How changes to the job are handled
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repairing versus replacing in Ballingdon Bottom
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Ballingdon Bottom. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- No need to remove anything
- One visit for most repairs
- Work done at your home or business
- Every repair guaranteed for a year
Read our full price list.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Let us know if it has been repaired before
Get a quote
Most customers in Ballingdon Bottom get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About Ballingdon Bottom
Ballingdon Bottom is about 5 miles north of Hemel Hempstead, in Hertfordshire. We travel to customers in Ballingdon Bottom and nearby villages, so nothing has to leave your home. Ballingdon Bottom is one of 381 towns and villages in Hertfordshire we cover. You can also see our page for London, about 28 miles away.
Every address in HP2 is covered. From Clements End Road and West Dene or anywhere nearby, we can come to you. If you are just outside Ballingdon Bottom, we cover Jockey End (1 mile south-east), Roe End (1 mile north-east), Markyate (2 miles north-east), Trowley Bottom (2 miles east) and Flamstead (3 miles east). Within a short drive, we also cover Watford (11 miles south), Hemel Hempstead (5 miles south), Stevenage (15 miles north-east), St Albans (8 miles south-east), Welwyn Garden City (13 miles east) and Harpenden (6 miles east).
Near you in Ballingdon Bottom
Our clients here include homes close to Gaddesden Row JMI School. The nearest railway station is Berkhamsted station, about 4.6 miles south-west. Well-known places in the area include Hemel Hempstead Hospital (4.6 miles south). For a walk, there’s Landpark Wood.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
How we price non-slip bath coating
There are no hourly rates or hidden extras. The price is based on:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- The colour and finish to match
- Access to the area
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- Natural light rather than flash
- Any details about the material
- A close-up of the damage, in focus
- A picture taken from further back
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Ballingdon Bottom: your questions answered
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Which areas do you work in?
Everywhere in the UK, Ballingdon Bottom included. Travel is included in the price.
What does non-slip bath coating cost?
We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
Do you work in Ballingdon Bottom?
Yes, we do. Repair technicians travel to Ballingdon Bottom from across the region, and the price is the same as everywhere else.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Places near Ballingdon Bottom
Other services in Ballingdon Bottom
About our accreditations · Every repair comes with a one-year guarantee.
