Perth and Kinross · Scotland
Non-slip bath & shower coating in Ballinluig, Perth and Kinross
Our technicians come to Ballinluig for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
About our non-slip bath coating in Ballinluig
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair resurfaced baths, wet room floors (ask us) and enamelled baths, and people most frequently call us about resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.
All of our repairs are guaranteed for twelve months in Ballinluig and everywhere else. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Ballinluig (PH9)
- Area hub
- Perth and Kinross
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Usually one visit, start to finish
- Dust sheets down, tidy finish
- No extra charge for your area
- Free fixed quotes from pictures
Take a look at our pricing.
Common questions in Ballinluig
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for non-slip bath coating in Ballinluig?
Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and you’ll get one combined price.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Nearby places to Ballinluig
More services for Ballinluig
What we’re called out for in Ballinluig
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
These are the problems we are asked about most:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Before booking anyone
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
How we price non-slip bath coating
A fixed quote means you know the cost before booking. We take into account:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Ballinluig. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A picture taken from further back
- The material, if you know it
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
How the visit works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Get a quote
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Landlords, agents and businesses in Ballinluig
For anyone letting property in or around Ballinluig, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
Ballinluig and nearby
Ballinluig is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 107 places in Perth and Kinross. Our nearest city page is Edinburgh, about 52 miles away.
All of PH9 is covered. We regularly work on streets such as Buail Bhan, Broom Hill and Braeside Road. We also cover the places around Ballinluig: Logierait (1 mile south-west), Dowally (3 miles south-east), Port na Craig (4 miles north-west), Pitlochry (4 miles north-west) and Grandtully (4 miles west). Within a short drive, we also cover Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (8 miles west), Stanley (15 miles south-east) and Bankfoot (12 miles south-east).
What’s near Ballinluig
We visit homes around Logierait Parish Church. Ballinluig’s nearest station is Pitlochry station, about 4 miles north-west of the centre. Nearby you’ll also find Pitlochry Community Hospital (4 miles north-west) and Atholl Palace Museum (3.6 miles north-west). Green spaces nearby include Lochan Oisinneach Mòr.
About our accreditations · Every repair comes with a one-year guarantee.
