Lancashire · England
Non-slip bath & shower coating in Barton, Lancashire
Our technicians come to Barton for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
How we handle non-slip bath coating in Barton
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with a bath or tray that is slippery when wet and safety for older or less mobile people, we can normally put it right.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Barton (L39)
- County
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need non-slip bath coating in Barton?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Barton contact us include:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Before booking anyone
- What happens if the damage is worse than the pictures show
- How to care for the finish
- If travel is included in the price
- When it can be used again
Your questions about non-slip bath coating in Barton
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I get a price for non-slip bath coating in Barton?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Which areas do you work in?
All of Lancashire, and the rest of the UK. Travel is included in the price.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Covering Barton
Barton is about 4 miles west of Ormskirk, in Lancashire. Whether you’re in the middle of Barton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Barton is one of 482 places in Lancashire we cover. We work right across the region, from Barton to Liverpool (about 12 miles away).
Here we cover the L39 postcode area. If you are just outside Barton, we cover Haskayne (1 mile south-east), Halsall (1 mile north-east), Downholland Cross (2 miles south-east), Bangor's Green (2 miles east) and Pinfold (3 miles north-east). We also work in nearby towns such as Chorley (15 miles east), Lytham St Anne's (12 miles north), Leyland (14 miles north-east), Skelmersdale (8 miles east), Ormskirk (4 miles east) and Penwortham (15 miles north-east).
Local landmarks in Barton
Our clients here include homes close to Halsall St Cuthbert's Church of England Primary School, among other places. For rail, the closest station is Ainsdale station, roughly 3.2 miles north-west. Well-known places in the area include Southport and Formby District General Hospital (4.1 miles north). The countryside around Barton includes Formby Red Squirrel Reserve.
When we’d advise against a repair
A repair is not right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
Landlords, agents and businesses in Barton
We work for landlords, letting agents and housing providers in Barton as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
How we price non-slip bath coating
You’ll know the full cost before booking. We look at:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Unusual colours or finishes
Our prices are the same across the UK, with no extra for Barton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- A clear, close picture of the problem area
- A photo taken from further back
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price without visiting.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Let us know which floor the room is on
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Also in Barton
Repairing versus replacing in Barton
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- Straight answers about what a repair can do
- Same prices wherever you are
- Fixed prices from your photos
- One-year guarantee on every repair
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
