Dudley · England

Non-Slip Bath Coating in Belbroughton

Fixed-price non-slip bath coating in Belbroughton and the surrounding area, done in a single visit in most cases.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Belbroughton

Non-slip bath coating in Belbroughton without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include safety for older or less mobile people and a bath or tray that is slippery when wet, in enamelled baths, shower trays and wet room floors (ask us).

The work is covered for a year after we finish. If anything is not right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Belbroughton (DY9)
Area hub
Dudley
Guarantee
12 months on all our work
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Our work in Belbroughton

Belbroughton is about 4 miles south of Stourbridge, in Dudley. Our technicians come to clients in Belbroughton and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 63 towns and villages in Dudley. Our nearest city page is Birmingham, about 11 miles away.

Our visits in DY9 are booked in the same way as anywhere else. Jobs here include addresses on Church Road, High Street and The Glebe and the roads around them. We also travel to Hartle (1 mile east), Broom Hill (1 mile south), Drayton (1 mile south-west), Yieldingtree (1 mile west) and Dordale (2 miles south). Within a short drive, we also cover Dudley (8 miles north), Halesowen (5 miles north-east), Stourbridge (4 miles north), Kingswinford (7 miles north), Sedgley (9 miles north) and Brierley Hill (6 miles north).

Landmarks near Belbroughton

We visit homes around Church of the Holy Trinity, Belbroughton CofE Primary School and The Talbot pub and the streets around them. The closest station to Belbroughton is Hagley station, roughly 2.5 miles north-west of the centre. Further afield, we also cover the area around Barnsley Hall Hospital (3.7 miles south-east) and Castlebourne folly (1.5 miles east). For a walk, there’s Chaddesley Woods National Nature Reserve and Walton Hill.

Map of Belbroughton © OpenStreetMap contributors

How the visit works

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Make sure the room can be ventilated
  • Point us to the nearest place to park
  • Make sure the area is dry

Ask for a price

Upload photos of the damage and one of the entire item, and tell us you are in Belbroughton, and we’ll reply with a fixed price.

Send pictures for a quote

Related advice

Landlords, agents and businesses in Belbroughton

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What non-slip bath coating costs

Quotes are free and the price is fixed. What we take into account:

  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • Access to the area
  • What kind of damage it is

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • One picture of the whole bath or shower tray
  • The postcode, so we can plan the visit
  • Details of any past repairs
  • Any details about the material

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Repair or replace in Belbroughton?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why Belbroughton customers choose us

  • Rooms protected and left tidy
  • No need to remove anything
  • Honest advice, even when it means no job
  • Work done at your home or business

Take a look at our prices page.

Do you need non-slip bath coating in Belbroughton?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a photo if you notice any of these:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

Before booking anyone

  • Whether there are any call-out or travel charges
  • Whether a trained technician does the job
  • How long it needs to cure
  • How changes to the job are handled

Choosing a repair company

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

Belbroughton questions

What areas do you cover?

We work UK-wide, and that includes Belbroughton. Our prices are the same everywhere.

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Are there extra charges for Belbroughton?

We don’t add a call-out fee. Your fixed quote includes everything.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Do you work in Belbroughton?

Yes, we do. Repair technicians travel to Belbroughton from across the region, and the price is the same as everywhere else.

Do you work for landlords and businesses?

Yes, frequently. We can quote for several properties together and work between tenancies.

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.