Buckinghamshire · England

Non-Slip Bath Coating in Bellingdon

Non-slip bath coating for Bellingdon, without a refit. Get a fixed quote from your photos, then we come to you.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Bellingdon homes

Non-slip bath coating in Bellingdon without replacing anything

It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. We work on shower trays, wet room floors (ask us) and enamelled baths, and people most often call us about a bath or tray that is slippery when wet and worn-out textured areas.

All our work comes with a one-year guarantee, wherever you are in Buckinghamshire. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Bellingdon (HP5)
County
Buckinghamshire
Guarantee
A year, on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026

Repair or replace in Bellingdon?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why book with us

  • A fixed quote before booking
  • CHAS and Constructionline accredited
  • Most jobs done in one visit
  • A year’s guarantee on all work

See our prices page.

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Make sure the area is dry
  • Clear the area around the damage
  • Keep pets and children out of the room while we work

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed price

Related advice

What we cannot put right

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Bellingdon

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Questions from Bellingdon

How quickly can you book me in?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there any odour?

Expect a mild smell while we’re working.

Are there extra charges for Bellingdon?

No. Our quotes include travel, with the same prices everywhere we work.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Prices and what affects them

A fixed quote means you know the cost before you book. We take into account:

  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • How hard the colour is to match

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

How to get a fixed quote

You can take the photos on your phone, there is no need for anything special. Ensure they show:

  • One sharp close-up of the damage
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • Any details about the material

Send us a picture of the damage and one of the whole item, with your HP5 postcode, and we’ll come back with a fixed quote.

Covering Bellingdon

Bellingdon is about 2 miles north-west of Chesham, in Buckinghamshire. From the centre of Bellingdon to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bellingdon is one of 263 places in Buckinghamshire where we work. Our jobs stretch from Bellingdon to London (about 29 miles away).

We work across HP5 and the streets around it. From Hawridge Lane, Chesham Road and Cedar Grove or a nearby road, a technician can come to you. Close by, we cover Asheridge (1 mile south), Hawridge (1 mile north), Heath End (1 mile north-east), Chartridge (1 mile south) and Cholesbury (1 mile north-west). Further out, we also cover Aylesbury (9 miles north-west), High Wycombe (9 miles south-west), Marlow (13 miles south-west), Amersham (5 miles south), Beaconsfield (9 miles south) and Chalfont St Peter (10 miles south).

Around Bellingdon

Our customers here include homes close to Chiltern Hills Academy, The Bull pub and St John's Church, among other places. The closest station to Bellingdon is Berkhamsted station, roughly 3.6 miles north-east. Further afield, we also cover the area around Hawridge Court (0.6 miles east) and Chiltern Hospital (4.2 miles south-west). Green spaces nearby include Sands Bank and Pavis Wood.

Map of Bellingdon © OpenStreetMap contributors

Landlords, agents and businesses in Bellingdon

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Common problems we fix in Bellingdon

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for these signs:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • How long it needs to cure
  • How to look after the finish
  • Whether cleaning and preparation are in the price
  • The length of the guarantee and what it covers

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.