County Durham · England

Non-slip bath & shower coating in Belmont, County Durham

Clear non-slip coatings for baths and shower trays for homes and businesses in Belmont and across County Durham. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Belmont

Repairing versus replacing in Belmont

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Nothing taken out or refitted
  • Fixed prices from your pictures
  • One visit for most repairs
  • Straight answers about what a repair can do

Take a look at our prices page.

How we handle non-slip bath coating in Belmont

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on resurfaced baths, acrylic baths and enamelled baths, and common reasons people contact us are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Belmont (DH1, DH99, DH7)
Area hub
County Durham
Warranty
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Belmont questions

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.

What happens after I send pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

What does non-slip bath coating cost?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

How do I book?

Use the quote form or ring 0345 017 0787.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • How many items we do on one visit
  • What the surface is made of
  • The type of damage
  • Where the damage is and how we get to it

The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

How to get a fixed price

We price nearly every job from photos. This is what to send:

  • One picture of the whole bath or shower tray
  • The material, if you know it
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Honest limits

A repair is not right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths

Our work in Belmont

Belmont is about 2 miles east of Durham, in County Durham. Jobs in Belmont are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Belmont is one of 329 places in County Durham we cover. Our nearest city page is Newcastle upon Tyne, about 15 miles away.

We work across the DH1, DH99 and DH7 postcode area and the streets around it. Local streets include High Street, Grange Road and Renny's Lane. With the A1(M) close by, Belmont is simple for us to get to. Nearby, we also work in Moor End (1 mile north), Carrville (1 mile north-east), Gilesgate (1 mile west), Old Durham (1 mile south-west) and Sherburn House (1 mile south). Larger places within reach include Consett (13 miles west), Newton Aycliffe (11 miles south), Bishop Auckland (11 miles south-west), Spennymoor (7 miles south-west), Seaham (8 miles north-east) and Chester-le-Street (5 miles north).

What’s near Belmont

Locally, our jobs take us to homes close to Old Durham Gardens, Belmont Community School and Belmont CofE (Controlled) Primary School, among other places. The closest station to Belmont is Durham station, roughly 2 miles west. Well-known places in the area include Durham Museum (1.8 miles south-west) and The Gates Shopping Centre (1.9 miles west).

  • Parks and local facilities nearby include Durham (2 miles west)
Map of Belmont © OpenStreetMap contributors

Landlords, agents and businesses in Belmont

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

How it works

We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

When to call us in Belmont

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • What protection goes down before work starts
  • Who turns up on the day
  • How the colour is matched
  • If travel is included in the price

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.