Kent · England

Non-Slip Bath Coating in Bullingstone

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Bullingstone. Free, fixed quotes from your photos.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Bullingstone

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • No extra charge for your area
  • Everything repaired in place
  • Free fixed quotes from pictures
  • Honest advice, even when it means no job

Take a look at our prices page.

Non-slip bath coating in Bullingstone without replacing anything

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s worn-out textured areas and bath mats that harbour mould or get forgotten, we can typically put it right.

Big or small, you get the same one-year guarantee in Bullingstone and across Kent. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Bullingstone (TN3)
Area hub
Kent
Guarantee
One year on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What a repair cannot fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Bullingstone questions

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

What happens next?

We come back with a fixed price, plus dates. You are under no obligation.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.

Can you repair something that’s been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

For landlords and businesses

If you manage property in Bullingstone, we will quote for several properties at once. Just send photos for each address and we will price them together.

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

The process

Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Have a window or extractor fan available
  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price.

Get a fixed quote

Related advice

Signs you need non-slip bath coating in Bullingstone

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Look out for these signs:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • What prep work is covered
  • How the colour is matched
  • Whether the price is fixed and includes VAT
  • What aftercare is recommended

Our hiring checklist

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What non-slip bath coating costs

Prices are worked out job by job. The main factors are:

  • How many areas need work
  • Doing more than one item at once
  • Unusual colours or finishes
  • What the surface is made of

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • A wider photo showing the whole bath or shower tray
  • Where you are, by postcode
  • Something in shot to show the size

Most customers in Bullingstone get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

About Bullingstone

Bullingstone is about 3 miles west of Royal Tunbridge Wells, in Kent. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Bullingstone is one of 922 towns and villages in Kent where we work. You can also see our page for London, about 28 miles away.

We cover every part of the TN3 postcode area and the streets around it. From Bullingstone Lane, Ewehurst Lane and Langton Road or a nearby road, a technician can come to you. We also cover the places around Bullingstone: Speldhurst (1 mile north-east), Poundsbridge (1 mile north-west), Langton Green (1 mile south), Stockland Green (1 mile north-east) and Rusthall (1 mile south-east). We also work in nearby towns such as Sevenoaks (9 miles north), Royal Tunbridge Wells (3 miles east), Tonbridge (5 miles north-east), Kings Hill (12 miles north-east), Paddock Wood (8 miles east) and Edenbridge (7 miles north-west).

What’s near Bullingstone

Typical jobs here are in homes near Church of St Mary the Virgin, Bennett Memorial Diocesan School and The George And Dragon pub, among other places. Bullingstone’s nearest station is Tunbridge Wells station, roughly 2.5 miles south-east of the centre. Well-known places in the area include Chiddingstone Castle (4 miles north-west) and Tunbridge Wells Museum and Art Gallery (2.4 miles east). For a walk, there is Barden Lake and Broadwater Warren RSPB Reserve.

Map of Bullingstone © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.