Oxfordshire · England
Non-slip bath & shower coating in Bure Park, Oxfordshire
Non-slip bath coating in Bure Park without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Bure Park
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
About our non-slip bath coating in Bure Park
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We are frequently asked to fix bath mats that harbour mould or get forgotten and safety for older or less mobile people, on resurfaced baths, wet room floors (ask us) and shower trays.
Big or small, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Bure Park (OX26, OX27)
- County
- Oxfordshire
- Cover
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What non-slip bath coating costs
You will not pay by the hour. The price is based on:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How hard the colour is to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
Phone photos are fine, there’s no need for anything special. Ensure they show:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A photo taken from further back
Send us photos of the damage and a wider shot of the whole item, and tell us you are in Bure Park, and we will come back with a fixed quote.
Our work in Bure Park
Bure Park is about 1 mile north of Bicester, in Oxfordshire. Jobs in Bure Park are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 443 places across Oxfordshire, from the larger towns to small villages. Our jobs stretch from Bure Park to Birmingham (about 50 miles away).
All of OX26 and OX27 is covered, from the main roads to the quietest streets. From Blake Road, Graham Road and Bunyan Road or anywhere nearby, a technician can come to you. Bure Park is on the A4095, so it’s easy for us to reach. Neighbouring places we cover include Bicester (1 mile south), Caversfield (1 mile north-east), Bucknell (2 miles north-west), Stratton Audley (2 miles north-east) and Stoke Lyne (3 miles north). Further out, we also cover Oxford (11 miles south), Banbury (13 miles north-west), Thame (14 miles south-east), Kidlington (8 miles south-west), Headington Quarry (11 miles south) and St John Street area (12 miles south-west).
Near you in Bure Park
Typical jobs here are in homes near The Star pub, Cooper School and Emmanuel Church Bicester, among other places. For rail, the closest station is Bicester North station, roughly 0.6 miles south-east. Nearby you’ll also find Bicester Village (1.3 miles south) and Bicester Community Hospital (1 mile south). Not far away are Graven Hill and Woodsides Meadow.
Common problems we fix in Bure Park
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
People normally call us when they notice one of these:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Questions to ask before booking
- The length of the guarantee and what it covers
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- Who will actually do the work
Landlord and trade work in Bure Park
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Bure Park use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Questions from Bure Park
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Which areas do you work in?
We cover the entire UK, including Bure Park and the rest of Oxfordshire. Send your postcode with your photos and we’ll offer you dates.
How do I get a price for non-slip bath coating in Bure Park?
Because every job differs, we price from pictures. You will get a fixed figure before you book.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What happens after I send photos?
You’ll get a fixed quote back, usually with dates to choose from. There’s no obligation to book.
Do you come to Bure Park?
Yes. We cover the entire UK and travel to Bure Park and the rest of Oxfordshire. Send us photos for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Towns and villages near Bure Park
More services for Bure Park
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Read more
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Repairing versus replacing in Bure Park
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We charge the same wherever you are, so there’s no premium for Bure Park. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Everything repaired in place
- A year’s guarantee on all work
- Rooms protected and left tidy
- Same prices wherever you are
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
