Hertfordshire · England
Non-slip bath & shower coating in Caldecote, Hertfordshire
Clear non-slip coatings for baths and shower trays in Caldecote, carried out at your home and guaranteed for a year.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Non-slip bath coating in Caldecote without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on enamelled baths, wet room floors (ask us) and resurfaced baths, and common reasons people get in touch are resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.
We stand behind the work with a one-year guarantee, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Caldecote (SG7)
- County
- Hertfordshire
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
- Enamelled baths
Do you need non-slip bath coating in Caldecote?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Most people get in touch after spotting one of these:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Comparing quotes
- What preparation is included
- A fixed price, and whether VAT is included
- How to look after the finish
- What happens if the damage is worse than the pictures show
FAQs for Caldecote
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you come to Caldecote?
Yes. We work across the UK and travel to Caldecote. Send us photos for a fixed quote, or call 0345 017 0787.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
What affects the price in Caldecote
Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- What the surface is made of
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
You can typically get a fixed price without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A wider photo showing the whole bath or shower tray
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Our work in Caldecote
Caldecote is about 2 miles north-east of Stotfold, in Hertfordshire. Jobs in Caldecote are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 381 places in Hertfordshire. Our jobs stretch from Caldecote to London (37 miles away).
Every address in SG7 is within our area, from the main roads to the quietest streets. Other places close to Caldecote include Newnham (1 mile south-east), Bury End (1 mile north), Hinxworth (1 mile north), Ashwell End (1 mile north-east) and Ashwell (2 miles east). Larger places within reach include Stevenage (9 miles south), Hitchin (7 miles south-west), Letchworth (4 miles south), Letchworth Garden City (4 miles south), Baldock (3 miles south) and Benslow (6 miles south-west).
Local landmarks in Caldecote
Locally, our jobs take us to homes close to St Mary Magdalene's Church. The nearest railway station is Baldock station, roughly 2.8 miles south of the centre. Other landmarks nearby include Bygrave House (2.4 miles south-east) and Stotfold Watermill & Nature Reserve (1.5 miles south-west). Not far away are Arlesey Old Moat and Glebe Meadows.
Repairing versus replacing in Caldecote
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Normally one visit, start to finish
- Nothing taken out or refitted
Read our full price list.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It usually takes a morning or an afternoon, and you can get on with other things while we’re there.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
More services for Caldecote
About our accreditations · Every repair comes with a one-year guarantee.
