Bedford Borough · England

Non-slip bath & shower coating in Carlton, Bedford Borough

Our technicians come to Carlton for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Carlton

About our non-slip bath coating in Carlton

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our repair technicians work on enamelled baths, wet room floors (ask us) and shower trays, and people most frequently call us about a bath or tray that is slippery when wet and worn-out textured areas.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Carlton (MK43)
County
Bedford Borough
Cover
A year, on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Do you need non-slip bath coating in Carlton?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people get in touch after spotting something like this:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • What the guarantee covers, and for how long
  • When it can be used again
  • How the room is protected while they work
  • What prep work is covered

10 questions to ask before booking

Landlords, agents and businesses in Carlton

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

FAQs for Carlton

Will there be a smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

How do I get a price for non-slip bath coating in Carlton?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.

What do you need from me?

Photos of the damage, a photo of the entire bath or shower tray and your postcode. Then we will agree a date.

What happens once I’ve sent pictures?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

How we price non-slip bath coating

There’s no area surcharge for Carlton. What changes the price is:

  • Previous DIY repairs that have to come out
  • How many items we do on one visit
  • What the surface is made of
  • The colour and finish to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Send pictures for a quote

Phone pictures are fine. Just make sure we can see:

  • The material, if you know it
  • Where you are, by postcode
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before

To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

The process

You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing

How to get a price

Email us photos of the damage and a wider shot of the entire item, with your MK43 postcode, and we will come back with a fixed quote.

Get a fixed quote

Advice

Repair or replace in Carlton?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Carlton customers choose us

  • One-year guarantee on every repair
  • Typically one visit, start to finish
  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted

Read our pricing.

Carlton and nearby

Carlton is about 7 miles north-west of Kempston, in Bedford Borough. Jobs in Carlton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 94 places across Bedford Borough. Our jobs stretch from Carlton to London (52 miles away).

We cover every part of MK43. You’ll find streets such as High Street, Street Close and Beeby Way. Neighbouring places we cover include Chellington (1 mile north-east), Turvey (2 miles south), Cold Brayfield (2 miles south-west), Lavendon (3 miles south-west) and Newton Blossomville (3 miles south-west). Further out, we also cover Bedford (7 miles south-east), Kempston (7 miles south-east), Cauldwell (7 miles south-east), Wixams (9 miles south-east), Wootton (7 miles south-east) and Goldington (8 miles east).

Around Carlton

We visit homes around Church of St Mary, The Angel Public House and Carlton CofE Primary School. Further afield, we also cover the area around Odell Castle (1.7 miles north-east). Not far away are Pavenham Osier Beds.

Map of Carlton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.