Windsor and Maidenhead · England
Non-slip bath & shower coating in Clewer, Windsor and Maidenhead
Clear non-slip coatings for baths and shower trays at your home in Clewer, with a one-year guarantee on every repair.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
Non-slip bath coating in Clewer, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, in shower trays, wet room floors (ask us) and enamelled baths.
All our work comes with a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Clewer (SL4)
- County
- Windsor and Maidenhead
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Why us?
- Honest advice, even when it means no job
- Normally one visit, start to finish
- One price list for the whole UK
- CHAS and Constructionline accredited
Read our full price list.
Do you need non-slip bath coating in Clewer?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Questions to ask before you book
- What happens if they find more damage
- What aftercare is recommended
- If travel is included in the price
- What the guarantee covers, and for how long
What we do, step by step
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote the same day in most cases.
Advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What affects the price in Clewer
A fixed quote means you know the cost before booking. We look at:
- Access to the area
- How hard the colour is to match
- How many areas need work
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A picture taken from further back
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Landlord and trade work in Clewer
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Clewer, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Clewer
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
Covering Clewer
Clewer is about 1 mile north of Windsor, in Windsor and Maidenhead. Whether you’re in the middle of Clewer or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Clewer is one of 57 places in Windsor and Maidenhead where we work. You can also see our page for London, about 23 miles away.
Our visits in SL4 are booked in the same way as anywhere else. Local streets include Oak Lane, Vale Road and Mill Lane, all of which we cover. Clewer sits on or near the A308 and A332, which makes travel easy. We also travel to Windsor (1 mile south), Eton (1 mile north-east), Eton Wick (1 mile north-west), Boveney (1 mile west) and Dedworth (1 mile south-west). Larger places within reach include Maidenhead (5 miles north-west), Boyn Hill (5 miles west), North Ascot (5 miles south-west), Cookham (7 miles north-west), Furze Platt (6 miles north-west) and Broomhall (6 miles south).
Near you in Clewer
Typical jobs here are in homes near St Edward's Catholic First School, The Windsor Boys' School and The Vansittart Arms and the streets around them. You’ll also find Church of St Andrew (within half a mile north-east), The Goswells (0.7 miles east) and The Windsor Boys' School (within half a mile south-east). For rail, the closest station is Windsor & Eton Central station, about 0.7 miles east of the centre. Other landmarks nearby include King Edward VII Hospital (1 mile south-east) and Municipal Borough of Slough (2.3 miles north-east). For a walk, there is Taplow Lake and Bray Pit.
Also in Clewer
Clewer: your questions answered
Do you cover Clewer?
We do. Technicians travel to Clewer from across the region, and the price is the same as everywhere else.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What areas do you cover?
Everywhere in the UK, Clewer included. Travel is included in the price.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What does non-slip bath coating cost?
We give a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
About our accreditations · Every repair comes with a one-year guarantee.
