Shropshire · England

Non-slip bath & shower coating in Colebatch, Shropshire

Local non-slip bath coating for Colebatch: photo quotes, tidy work and a year’s guarantee.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Colebatch?

Non-slip bath coating in Colebatch without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you’re dealing with safety for older or less mobile people and a bath or tray that is slippery when wet, we can normally put it right, whatever the material.

All of our repairs are guaranteed for twelve months in Colebatch and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Colebatch (SY9)
Area hub
Shropshire
Cover
One year on every repair
Quote
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Our work in Colebatch

Colebatch is about 13 miles east of Y Drenewydd, in Shropshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 433 places in Shropshire. You can also see our page for Birmingham, about 47 miles away.

We work across the SY9 postcode area and the streets around it. Being close to the A488, Colebatch is simple for us to get to. We also cover the places around Colebatch: Cabin (1 mile north), Bishop's Moat (2 miles north-west), Whitcott Keysett (4 miles south-west), Mardu (4 miles south-west) and Clun (4 miles south). Within a short drive, we also cover Ludlow (14 miles south-east), Church Stretton (9 miles north-east), Craven Arms (7 miles east), Pontesbury (13 miles north), Minsterley (12 miles north) and East Hamlet (14 miles south-east).

Landmarks near Colebatch

Our customers here include homes close to Church of St John the Baptist, Bishop's Castle Community College and Bishops Castle Primary School, among other places. You’ll also find The Six Bells And Former Stables To Rear pub (0.8 miles north) and Bishop's Castle Community College (0.7 miles north-east). A little further out are Bishop's Castle Community Hospital (1 mile north) and Weighbridge Railway Museum (1 mile north). Green spaces nearby include Aston Hill.

Map of Colebatch © OpenStreetMap contributors

Prices and what affects them

You’ll know the full cost before you book. We take into account:

  • What the surface is made of
  • Doing more than one item at once
  • Where the damage is and how we get to it
  • How many areas need work

Our prices are the same across the UK, so there is no premium for Colebatch. The job itself decides the price: the material, the amount of damage and how many items.

Send pictures for a quote

Most quotes are done from pictures alone. To make it quick:

  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • A picture taken from further back
  • What it’s made of, if you know

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

When a repair isn’t the answer

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths

What we do, step by step

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and how to care for it.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift
  • Let us know about parking or access

Get a quote

To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Read more

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year
  • One price list for the whole UK
  • We come to you, anywhere in the UK

Read our pricing.

What we’re called out for in Colebatch

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Before booking anyone

  • How your room will be protected
  • How long the guarantee is and what it covers
  • How changes to the job are handled
  • What preparation is included

How to compare quotes

Your questions about non-slip bath coating in Colebatch

What if the damage is worse than the pictures show?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

What areas do you cover?

We work UK-wide, so Colebatch is covered. Our prices are the same everywhere.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you come to Colebatch?

We do. We send a technician to Colebatch for every job, and the price is the same as everywhere else.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

For landlords and businesses

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.

Landlords, letting agents and housing providers in Colebatch use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.