Coleraine · Northern Ireland

Non-slip bath & shower coating in Coleraine

Clear non-slip coatings for baths and shower trays for homes and businesses in Coleraine and the surrounding area. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Coleraine

Our work in Coleraine

Coleraine is in Northern Ireland. Whether you are in the middle of Coleraine or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee.

Jobs in BT52 work the same way as everywhere else we cover. Close by, we cover Portstewart (4 miles north-west), Portrush (4 miles north), Bushmills (7 miles north-east), Ballymoney (8 miles south-east) and Limavady (13 miles south-west). For island and remote addresses, call first so we can plan the visit.

Landmarks near Coleraine

In Coleraine, that means homes near Causeway Coast Vineyard Church, St Joseph's College and Irish Society Primary School. Other local landmarks include 12 Waterside pub (1 mile west) and Harpurs Hill Primary School (less than half a mile north). A little further out are Causeway Hospital (0.8 miles south) and Coleraine Museum (0.7 miles west).

Map of Coleraine © OpenStreetMap contributors

About our non-slip bath coating in Coleraine

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, in enamelled baths, acrylic baths and resurfaced baths.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Coleraine (BT52)
Area hub
Coleraine
Guarantee
One year on every repair
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we cannot put right

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths

Coleraine: your questions answered

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you come to Coleraine?

Yes. We cover the entire UK and come to Coleraine and the rest of Coleraine. Send us photos for a fixed quote, or call 0345 017 0787.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

Will I see the coating?

Very little: the treated area looks slightly matt.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • Usually one visit, start to finish
  • Dust sheets down, tidy finish
  • Every repair guaranteed for a year
  • Honest advice, even when it means no job

See our prices page.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Ensure the area is dry
  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Advice

Signs you need non-slip bath coating in Coleraine

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People normally call us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

What to look for in a quote

  • What happens if they find more damage
  • Is the price fixed, and does it include VAT?
  • If travel is included in the price
  • How long it needs to cure

Our hiring checklist

Landlord and trade work in Coleraine

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

What affects the price in Coleraine

We price every job individually, from your pictures. What matters most is:

  • Where the damage is and how we get to it
  • The material
  • Any earlier repairs that need removing first
  • How much damage there is

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size
  • Natural light rather than flash
  • Where you are, by postcode

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.