Gloucestershire · England
Non-slip bath & shower coating in Coopers Edge, Gloucestershire
Clear non-slip coatings for baths and shower trays for homes and businesses in Coopers Edge and across Gloucestershire. Send photos for a free, fixed quote.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating at your home in Coopers Edge
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We’re frequently asked to fix bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, on wet room floors (ask us), enamelled baths and resurfaced baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Coopers Edge (GL3, GL4)
- Region
- Gloucestershire
- Warranty
- One year on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Coopers Edge
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Landlords, letting agents and housing providers in Coopers Edge use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Nearby places to Coopers Edge
Also in Coopers Edge
When to call us in Coopers Edge
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
If you can see any of these, send us a photo:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- How the room is protected while they work
- When it can be used again
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, usually overnight.
Before we arrive
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Getting a price
Email us a picture of the damage and a wider shot of the whole item, with your GL3 postcode, and we’ll come back with a fixed quote.
Advice
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Our work in Coopers Edge
Coopers Edge is about 2 miles east of Gloucester, in Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Coopers Edge is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Coopers Edge to Birmingham (45 miles away).
Every address in GL3 and GL4 is within our area, from the main roads to the quietest streets. From Guan Road, Bird Road and Adams Lane or a nearby road, we can come to you. Coopers Edge sits on or near the M5, so getting to you is simple. Neighbouring places we cover include Hucclecote (1 mile north), Brockworth (1 mile east), Upton St Leonards (1 mile south-west), Cooper's Hill (1 mile south-east) and Little Witcombe (2 miles east). We also work in nearby towns such as Cheltenham (6 miles north-east), Stroud (7 miles south), Tewkesbury (10 miles north), St Paul's (6 miles north-east), Cirencester (13 miles south-east) and Lansdown (6 miles north-east).
What’s near Coopers Edge
In Coopers Edge, that means homes near Christchurch, Lobley's Drive Park and Henley Bank High School. The nearest railway station is Gloucester station, about 2.9 miles north-west of the centre. Other landmarks nearby include Gloucester Castle (3.2 miles north-west) and Coney Hill Hospital (1.1 miles west). Not far away are Cooper's Hill.
How we price non-slip bath coating
You will know the full cost before booking. We look at:
- Access to the area
- Doing more than one item at once
- The size and number of damaged areas
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- One picture of the whole bath or shower tray
- Something in shot to show the size
- Any earlier repairs or coatings
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Coopers Edge: your questions answered
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work in Coopers Edge?
Yes. We work across the UK and travel to Coopers Edge and the rest of Gloucestershire. Send photos and we will quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Same prices wherever you are
- Honest advice, even when it means no job
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
