Derbyshire · England

Non-Slip Bath Coating in Ednaston

We travel to Ednaston for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Ednaston

Honest limits

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before booking.

Materials we work on in Ednaston

  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)

Non-slip bath coating at your home in Ednaston

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We are frequently asked to fix bath mats that harbour mould or get forgotten and worn-out textured areas, across shower trays, enamelled baths and wet room floors (ask us).

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Ednaston (DE6)
Area hub
Derbyshire
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Ednaston

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in Ednaston contact us are:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Before you book anyone

  • Whether a trained technician does the job
  • What protection goes down before work starts
  • When it can be used again
  • If travel is included in the price

Choosing a repair company

How it works

We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area
  • Make sure the room can be ventilated

Getting a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Related advice

Questions from Ednaston

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens once I’ve sent photos?

We come back with a fixed price, plus dates. You are under no obligation.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Which areas do you work in?

We work UK-wide, so Ednaston is covered. Prices don’t change with location.

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

What you get with us

  • Nothing taken out or refitted
  • Same prices wherever you are
  • Honest advice, even when it means no job
  • Fixed prices from your pictures

See our full price list.

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

About Ednaston

Ednaston is about 8 miles south-west of Belper, in Derbyshire. Anywhere in DE6, we come to you. Our technicians cover all 532 towns and villages across Derbyshire. Our jobs stretch from Ednaston to Birmingham (37 miles away).

We work across DE6 and the streets around it. We also travel to Commonside (1 mile south-east), Brailsford (1 mile south-east), Brailsford Green (1 mile south-east), Shirley (1 mile west) and Mercaston (2 miles east). Further out, we also cover Swadlincote (14 miles south), Ilkeston (14 miles east), Belper (8 miles north-east), Heanor (13 miles east), Ripley (11 miles north-east) and Langley Mill (13 miles east).

Around Ednaston

Our clients here include homes close to Brailsford CofE Primary School and Church of All Saints and the streets around them. Further afield, we also cover the area around St Oswalds Hospital (4.6 miles north-west).

Map of Ednaston © OpenStreetMap contributors

Landlords, agents and businesses in Ednaston

We work for landlords, letting agents and housing providers in Ednaston as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.

How we price non-slip bath coating

Each job gets its own fixed quote. These are the things that affect it:

  • How many items we do on one visit
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it

Our prices are the same across the UK, so there’s no premium for Ednaston. What changes the price is the job itself: the material, the amount of damage and how many items.

Send photos for a quote

We price nearly every job from photos. This is what to send:

  • One picture of the entire bath or shower tray
  • Whether it’s been repaired or coated before
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection

To get a price, send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.