County Durham · England

Non-Slip Bath Coating in Elvet

Non-slip bath coating across Elvet and nearby, usually in one visit and guaranteed for a year.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Elvet homes

Landlords, agents and businesses in Elvet

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Non-slip bath coating at your home in Elvet

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We regularly repair acrylic baths, resurfaced baths and shower trays, and common reasons people contact us are bath mats that harbour mould or get forgotten and safety for older or less mobile people.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Elvet (DH1, DH99)
Area hub
County Durham
Cover
One year on every repair
Price
Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why book with us

  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • No extra charge for your area
  • Most jobs done in one visit

Take a look at our pricing.

Where we work around Elvet

Elvet is about 1 mile south of Durham, in County Durham. Anywhere in DH1, we come to you. Our repair technicians cover 329 places in County Durham, from the larger towns to small villages. Our jobs stretch from Elvet to Newcastle upon Tyne (about 15 miles away).

Our repair technicians cover all of DH1 and DH99. You’ll find streets such as Grape Lane, Court Lane and Leazes Road. We also cover the places around Elvet: Crossgate (1 mile west), Durham (1 mile north), Neville's Cross (1 mile west), Gilesgate (1 mile north-east) and Old Durham (1 mile east). Further out, we also cover Consett (12 miles north-west), Newton Aycliffe (11 miles south), Bishop Auckland (10 miles south-west), Spennymoor (5 miles south), Seaham (10 miles north-east) and Chester-le-Street (5 miles north).

Local landmarks in Elvet

Around Elvet, we work in homes near St Margaret's Church of England Primary School, St Nicholas' Church and Durham Sixth Form Centre and the streets around them. You’ll also find The Shakespeare pub (less than half a mile west), Chorister School (within half a mile south-west), Old Durham Gardens (0.8 miles east) and Durham University Library and Collections (0.5 miles south). There is a railway station in Elvet itself: Durham station. Other landmarks nearby include Durham (0.6 miles north-west) and The Gates Shopping Centre (less than half a mile west).

Map of Elvet © OpenStreetMap contributors

What we cannot put right

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we work on in Elvet

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Ask for a price

To get a price, send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.

Get a fixed quote

Read more

Prices and what affects them

We price every job individually, from your photos. What matters most is:

  • Unusual colours or finishes
  • How easy the damage is to reach
  • Doing more than one item at once
  • What kind of damage it is

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

Before you send pictures, a few simple things make all the difference:

  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • The material, if you know it

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Elvet questions

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

What happens once I’ve sent pictures?

We come back with a fixed quote, plus dates. You’re under no obligation.

Do the materials smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

How do I book?

Send photos through the quote form or call 0345 017 0787.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Common problems we fix in Elvet

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

People usually call us when they notice something like this:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

Before booking anyone

  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • What happens if they find more damage
  • Whether the price is fixed and includes VAT

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.