Hampshire · England

Non-slip bath & shower coating in Fair Oak, Hampshire

Non-slip bath coating in and around Fair Oak: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Fair Oak

How we price non-slip bath coating

Each job gets its own fixed price. This is what makes a difference:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • The type of damage
  • Any earlier repairs that need removing first

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Send pictures for a quote

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • A photo taken from further back
  • Something in shot to show the size

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.

How we handle non-slip bath coating in Fair Oak

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Common call-outs are for bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, in shower trays, enamelled baths and resurfaced baths.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Location
Fair Oak (SO50)
County
Hampshire
Cover
A year, on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

What we’re called out for in Fair Oak

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Most people get in touch after spotting one of these:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

What your quote should include

  • Whether they match the colour on site
  • How long the guarantee is and what it covers
  • Aftercare advice
  • How the room is protected while they work

10 questions to ask before you book

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Shower trays

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Most jobs done in one visit
  • Dust sheets down, tidy finish
  • One price list for the entire UK
  • Nothing taken out or refitted

Read our pricing.

Covering Fair Oak

Fair Oak is about 2 miles east of Eastleigh, in Hampshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in 683 places in Hampshire, from the larger towns to small villages. We work right across the region, from Fair Oak to London (about 64 miles away).

Every address in SO50 is within our area. Whether you live on Dean Road, Witt Road and Sandy Lane or a nearby road, a technician can come to you. We also cover the places around Fair Oak: Horton Heath (1 mile south), Wintershill (2 miles east), Durley (2 miles south-east), Lower Upham (2 miles east) and Durley Street (2 miles east). Larger places within reach include Winchester (7 miles north), Gosport (13 miles south-east), Havant (15 miles south-east), Fareham (9 miles south-east), Horndean (13 miles east) and Totton (10 miles west).

Landmarks near Fair Oak

In Fair Oak, that means homes near Wyvern Technology College, The Old George Public House and Saint Thomas, among other places. Also close by are Wyvern Technology College (under half a mile south) and Fair Oak Junior School (within half a mile south). The closest station to Fair Oak is Hedge End station, about 2.2 miles south. Further afield, we also cover the area around Moorgreen Hospital (2.7 miles south-west) and Eastleigh Museum (2.5 miles west). For a walk, there’s Bishops Waltham Branch LNR.

Map of Fair Oak © OpenStreetMap contributors

The process

There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a morning or an afternoon.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day
  • Tell us about parking, stairs or access

How to get a price

Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Fair Oak, and we’ll come back with a fixed quote.

Send photos for a quote

Related advice

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Your questions about non-slip bath coating in Fair Oak

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

Do you cover Fair Oak?

Yes. We cover the entire UK and travel to Fair Oak. Send us photos for a fixed quote, or call 0345 017 0787.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can you redo someone else’s repair?

Generally, yes. The old repair comes out first, so let us know about it.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What does non-slip bath coating cost?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.