Oxfordshire · England
Non-slip bath & shower coating in Filchampstead, Oxfordshire
Fixed-price non-slip bath coating in Filchampstead and the surrounding area, done in a single visit in most cases.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
Filchampstead and nearby
Filchampstead is about 5 miles west of Oxford, in Oxfordshire. Wherever you are in the OX2 postcode area, a technician comes to you. Our repair technicians cover 443 places in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Filchampstead to Birmingham (55 miles away).
Every address in OX2 is covered, from the main roads to the quietest streets. Streets in the area include Cumnor Road and Lower Whitley Road. If you’re just outside Filchampstead, we cover Farmoor (1 mile north), Cumnor (1 mile south-east), Chawley (1 mile south-east), Dean Court (1 mile east) and Swinford (2 miles north). Within a short drive, we also cover Oxford (5 miles east), Didcot (11 miles south-east), Bicester (13 miles north-east), Abingdon-on-Thames (6 miles south-east), Witney (7 miles west) and Carterton (11 miles west).
Near you in Filchampstead
Typical jobs here are in homes near Cumnor Church of England School (Voluntary Controlled), St Mary's Church and Matthew Arnold School and the streets around them. For rail, the closest station is Oxford station, roughly 3.2 miles east of the centre. Further afield, we also cover the area around Oxford University Press Museum (3.4 miles east) and Radcliffe Infirmary (3.6 miles east). Not far away are Lashford Lane Fen and Cumnor Hill.
Non-slip bath coating in Filchampstead without replacing anything
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with worn-out textured areas and resurfaced baths that are now too smooth, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Filchampstead (OX2)
- Region
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Fixed prices from your photos
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
Take a look at our full price list.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
More services for Filchampstead
Signs you need non-slip bath coating in Filchampstead
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
These are the problems we are asked about most:
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Before booking anyone
- What aftercare is recommended
- How your room will be protected
- What happens if they find more damage
- Whether they match the colour on site
Questions from Filchampstead
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Do you come to Filchampstead?
We do. We send a technician to Filchampstead for every job, and the price is the same as everywhere else.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so mention it when you send pictures.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
How much does non-slip bath coating cost in Filchampstead?
We give a fixed quote from your photos. Send a close-up and a picture of the whole item with your OX2 postcode.
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- A picture taken from further back
- Your postcode, so we can check dates
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Let us know about parking or access
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
