Suffolk · England

Non-Slip Bath Coating in Freckenham

We travel to Freckenham for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Freckenham

Freckenham: your questions answered

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Suffolk.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before.

Non-slip bath coating at your home in Freckenham

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can generally put it right, whatever the material.

All our work comes with our one-year guarantee, wherever you are in Suffolk. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Freckenham (IP28)
County
Suffolk
Guarantee
One year on every repair
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Signs you need non-slip bath coating in Freckenham

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Questions to ask before booking

  • What prep work is covered
  • How the room is protected while they work
  • Whether they match the colour on site
  • How soon you can use it again

Our hiring checklist

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What affects the price in Freckenham

A fixed quote means you know the cost before booking. We look at:

  • Whether old repairs or coatings need taking off
  • The material and finish
  • The size and number of damaged areas
  • How hard the colour is to match

We charge the same wherever you are, with no extra for Freckenham. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your photos

Phone pictures are fine. Make sure they show:

  • A clear, close picture of the problem area
  • Details of any past repairs
  • One picture of the entire bath or shower tray
  • Where you are, by postcode

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours in most cases. We leave the room clean.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Let the surface dry out before the visit
  • Move bottles, mats and clutter away from the area
  • Keep a parking space free if you can

How to get a price

Send us a picture of the damage and one of the entire item, and tell us you’re in Freckenham, and we will reply with a fixed quote.

Get a fixed price

Read more

Where we work around Freckenham

Freckenham is about 6 miles north of Newmarket, in Suffolk. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Freckenham is one of 731 towns and villages in Suffolk we cover. We work right across the region, from Freckenham to London (about 61 miles away).

All of IP28 is covered. Streets in the area include The Street, North Street and Mildenhall Road. Close by, we cover Chippenham (1 mile south), Worlington (2 miles north-east), Isleham (2 miles north-west), West Row (2 miles north) and Red Lodge (2 miles south-east). Within a short drive, we also cover Bury St Edmunds (12 miles south-east), Brandon (11 miles north-east), Mildenhall (3 miles north-east), Lakenheath (7 miles north-east), Little Eriswell (6 miles north-east) and Barrow (8 miles south-east).

Near you in Freckenham

Locally, our jobs take us to homes close to The Golden Boar Public House, Church of St Andrew and Isleham Nature Reserve. The closest station to Freckenham is Kennett station, roughly 3.6 miles south-east. Well-known places in the area include Freckenham Castle (under half a mile south) and Mildenhall And District Museum (3.2 miles north-east). The countryside around Freckenham includes Fordham Woods.

Map of Freckenham © OpenStreetMap contributors

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Why book with us

  • No need to remove anything
  • Usually one visit, start to finish
  • Same prices wherever you are
  • CHAS and Constructionline accredited

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.