West Sussex · England
Non-Slip Bath Coating for Furnace Wood homes
Local non-slip bath coating for Furnace Wood: photo quotes, tidy work and a year’s guarantee.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we are done and tell you when it’s ready to use.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
Non-slip bath coating in Furnace Wood without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair shower trays, wet room floors (ask us) and acrylic baths, and the jobs we see most are bath mats that harbour mould or get forgotten and safety for older or less mobile people.
We stand behind the work with a one-year guarantee, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Furnace Wood (RH19)
- Region
- West Sussex
- Warranty
- A year, on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Furnace Wood
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When a repair is not the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Enamelled baths
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Why us?
- Same prices wherever you are
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Everything repaired in place
Take a look at our full price list.
Furnace Wood and nearby
Furnace Wood is about 3 miles west of East Grinstead, in West Sussex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Furnace Wood is one of 371 towns and villages in West Sussex where we work. You can also see our page for London, about 25 miles away.
Postcode districts we cover here: RH19. Jobs here include addresses on Lake View Road, Felcot Road and Furnace Farm Road. If you’re just outside Furnace Wood, we cover Domewood (1 mile north-west), Snow Hill (1 mile west), Felbridge (1 mile east), Crawley Down (1 mile south) and Newchapel (2 miles north-east). Within a short drive, we also cover Crawley (6 miles west), Horsham (12 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (3 miles east) and Broadfield (7 miles south-west).
What’s near Furnace Wood
In Furnace Wood, that means homes near Imberhorne School and Felbridge Primary School, among other places. The closest station to Furnace Wood is East Grinstead station, about 2.5 miles south-east of the centre. Nearby you will also find Effingham Park Motor Museum (0.9 miles west) and Queen Victoria Hospital (3.1 miles east). For a walk, there’s Hedgecourt Lake.
How we price non-slip bath coating
There is no area surcharge for Furnace Wood. The price reflects:
- The material
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Whether we combine several jobs
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- A wider photo showing the whole bath or shower tray
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Also near Furnace Wood
Also in Furnace Wood
FAQs for Furnace Wood
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
How do I get a price for non-slip bath coating in Furnace Wood?
We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your RH19 postcode.
Do you come to Furnace Wood?
Yes. We work across the UK and come to Furnace Wood. Send us photos for a fixed quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Common problems we fix in Furnace Wood
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
These are the problems we are asked about most:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
What your quote should include
- What the guarantee covers, and for how long
- Who turns up on the day
- What prep work is covered
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
