Warwickshire · England
Non-slip bath & shower coating in Halford, Warwickshire
Non-slip bath coating across Halford and nearby, done in a single visit in most cases.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before booking.
Materials we work on in Halford
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Enamelled baths
- Resurfaced baths
Non-slip bath coating at your home in Halford
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with resurfaced baths that are now too smooth and safety for older or less mobile people, we can generally put it right, on acrylic baths, resurfaced baths and enamelled baths alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Halford (CV36)
- Area hub
- Warwickshire
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Covering Halford
Halford is about 7 miles south-east of Stratford-upon-Avon, in Warwickshire. Customers in Halford get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Halford is one of 324 towns and villages in Warwickshire where we work. Our jobs stretch from Halford to Birmingham (28 miles away).
Every address in CV36 is covered, from the main roads to the quietest streets. Whether you live on The Leys, Stour View and Feldon Edge or anywhere nearby, a technician can come to you. Close by, we cover Newbold-on-Stour (1 mile north-west), Armscote (1 mile south-west), Ettington (2 miles north), Alderminster (3 miles north-west) and Whitchurch (4 miles north-west). Within a short drive, we also cover Warwick (12 miles north), Royal Leamington Spa (13 miles north), Stratford-upon-Avon (7 miles north-west), Leamington Spa (13 miles north), Southam (14 miles north-east) and Alcester (13 miles north-west).
Near you in Halford
Our customers here include homes close to Church of St Mary and Bird in Hand pub, among other places. Other landmarks nearby include Ellen Badger Hospital (2.8 miles south). Open spaces near Halford include Castle Hill.
Towns and villages near Halford
What else we do in Halford
What non-slip bath coating costs
There is no charge for travel to Halford. The price comes down to:
- The material and finish
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- One picture of the entire bath or shower tray
- Details of any past repairs
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
How to get a price
Upload a photo of the damage and one of the entire item, and tell us you’re in Halford, and we’ll come back with a fixed quote.
Advice
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Same prices wherever you are
- CHAS and Constructionline accredited
- A fixed quote before you book
- One visit for most repairs
Take a look at our prices page.
Questions from Halford
How do I get a price for non-slip bath coating in Halford?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you need non-slip bath coating in Halford?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Before booking anyone
- Who turns up on the day
- When it can be used again
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
