Telford and Wrekin · England

Non-Slip Bath Coating for Horsehay homes

Non-slip bath coating across Horsehay and nearby, done in a single visit in most cases.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Horsehay?

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

Non-slip bath coating in Horsehay without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on shower trays, acrylic baths and enamelled baths, and common reasons people contact us are safety for older or less mobile people and a bath or tray that is slippery when wet.

Every job is backed for twelve months in Horsehay and everywhere else. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Area
Horsehay (TF4, TF6)
County
Telford and Wrekin
Guarantee
One year on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Horsehay: your questions answered

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

What if the damage is worse than the pictures show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens once I’ve sent photos?

You get a fixed price and available dates. If we need another angle, we will ask.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

How do I get a price for non-slip bath coating in Horsehay?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

When to call us in Horsehay

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things customers normally mention when they call include:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • Who turns up on the day
  • How soon you can use it again
  • How the room is protected while they work
  • Whether cleaning and preparation are in the price

Choosing a repair company

What a repair can’t fix

We will always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths

Repair or replace in Horsehay?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Horsehay

  • Most jobs done in one visit
  • Honest advice, even when it means no job
  • Accredited with CHAS, Constructionline and SafeContractor
  • Work done at your home or business

Take a look at our prices page.

Horsehay and nearby

Horsehay is about 1 mile south-west of Dawley, in Telford and Wrekin. Customers in Horsehay get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Horsehay is one of 79 towns and villages in Telford and Wrekin we cover. Our jobs stretch from Horsehay to Birmingham (about 28 miles away).

We work across the TF4 and TF6 postcode area. Streets in the area include Frame Lane, Bridge Road and Langford Lane. Close by, we cover Doseley (1 mile east), Spring Village (1 mile north-east), Dawley (1 mile north-east), Coalbrookdale (1 mile south) and Lawley (1 mile north). We also work in nearby towns such as Telford (3 miles north-east), Wellington (3 miles north), Oakengates (3 miles north-east), Newport (9 miles north-east), St George’s (3 miles north-east) and Priorslee (4 miles north-east).

Around Horsehay

Around Horsehay, we work in homes near The Telford Langley School, Lightmoor Village Primary School and All Labour in Vain pub, among other places. For rail, the closest station is Telford Central station, about 2.7 miles north-east. A little further out are New Coracle Shed (1.6 miles south) and Princess Royal Hospital (3.9 miles north). Not far away are The Ercall.

Map of Horsehay © OpenStreetMap contributors

What affects the price in Horsehay

Quotes are free and the price is fixed. What we look at:

  • How hard the colour is to match
  • What kind of damage it is
  • Access to the area
  • Any earlier repairs that need removing first

We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Two or three clear pictures are generally enough. It helps if you send:

  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • A wider photo showing the entire bath or shower tray

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

How the visit works

We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, normally overnight.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift

Ask for a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.