Dorset · England

Non-Slip Bath Coating for Hurn homes

Fixed-price non-slip bath coating in Hurn and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Hurn?

Non-slip bath coating in Hurn, done in place

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We are frequently asked to fix resurfaced baths that are now too smooth and safety for older or less mobile people, on enamelled baths, resurfaced baths and acrylic baths.

Every repair is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Hurn (BH23)
County
Dorset
Cover
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Do you need non-slip bath coating in Hurn?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

What your quote should include

  • How to look after the finish
  • When it can be used again
  • What happens if they find more damage
  • Whether the colour is mixed to match

10 questions to ask before you book

Your questions about non-slip bath coating in Hurn

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

How much does non-slip bath coating cost in Hurn?

We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Do you work in Hurn?

Yes, we do. We send a technician to Hurn for every job, and the price is the same as everywhere else.

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that is in the quote.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • Whether old repairs or coatings need taking off
  • How much damage there is
  • The material and finish

Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • Whether it’s been repaired or coated before
  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • A coin or ruler next to the damage for scale

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

When we’d advise against a repair

We would rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Acrylic baths

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What we do, step by step

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a morning or an afternoon, including clearing up.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Keep pets and children out of the room while we work

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a fixed quote

Related advice

Landlords, agents and businesses in Hurn

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Our work in Hurn

Hurn is about 3 miles north-east of Bournemouth, in Dorset. From the centre of Hurn to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover all 462 towns and villages in Dorset, from the larger towns to small villages.

Our visits in BH23 are booked in the same way as anywhere else. Whether you live on Moors Close and Avon Causeway or a nearby road, a technician can come to you. We also cover the places around Hurn: West Hurn (1 mile south-west), Avon Common (1 mile north), Merritown (1 mile west), Holdenhurst (1 mile south) and Blackwater (1 mile south-east). Within a short drive, we also cover Christchurch (4 miles south-east), Wimborne Minster (7 miles west), Verwood (7 miles north), Ferndown (4 miles north-west), Broadstone (8 miles west) and Corfe Mullen (9 miles west).

Around Hurn

Our customers here include homes close to Bournemouth School for Girls, among other places. For rail, the closest station is Christchurch station, about 3 miles south-east of the centre. A little further out are Christchurch Castle (3.5 miles south-east) and Castlepoint Shopping Centre (1.8 miles south-west). The countryside around Hurn includes St Catherine's Hill.

Map of Hurn © OpenStreetMap contributors

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Why Hurn customers choose us

  • A fixed quote before you book
  • Repair technicians who travel to you, UK-wide
  • Most jobs done in one visit
  • CHAS and Constructionline accredited

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.