South Ayrshire · Scotland

Non-slip bath & shower coating in Kirkoswald, South Ayrshire

We travel to Kirkoswald for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Kirkoswald?

Signs you need non-slip bath coating in Kirkoswald

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Contact us if you’ve noticed any of these:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Questions to ask before you book

  • How to care for the finish
  • Whether there are any call-out or travel charges
  • Whether cleaning and preparation are in the price
  • When it can be used again

10 questions to ask before booking

Non-slip bath coating in Kirkoswald without replacing anything

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Our repair technicians work on enamelled baths, shower trays and acrylic baths, and common reasons people get in touch are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.

You get a one-year guarantee, the same in Kirkoswald as everywhere else we work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Kirkoswald (KA19)
Area hub
South Ayrshire
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

Every quote is fixed and free. What we take into account:

  • How many areas need work
  • The type of damage
  • Unusual colours or finishes
  • Access to the area

We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

Two or three clear pictures are usually enough. Try to include:

  • One picture of the whole bath or shower tray
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area
  • Something in shot to show the size

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

How it works

You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Ask for a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.

Send photos for a quote

Advice

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

About Kirkoswald

Kirkoswald is about 10 miles south-west of Ayr, in South Ayrshire. Wherever you are in the KA19 postcode area, we come to you. We work in 52 places across South Ayrshire, from the larger towns to small villages. You can also see our page for Glasgow, about 41 miles away.

Every address in KA19 is covered. Local streets include Main Road, Ashpad and Merkland Place, and we cover them all. Neighbouring places we cover include Maidens (2 miles west), Turnberry (3 miles south-west), Maybole (4 miles north-east), Dailly (4 miles south-east) and Old Dailly (5 miles south). Further out, we also cover Ayr (10 miles north-east), Prestwick (13 miles north-east), Heathfield (12 miles north-east), Belmont (10 miles north-east), Forehill (10 miles north-east) and Girvan (7 miles south-west).

Around Kirkoswald

In Kirkoswald, that means homes near Old Parish Church and Graveyard, among other places. The closest station to Kirkoswald is Maybole station, about 3.9 miles north-east of the centre. Nearby you will also find Thomaston Castle (1.2 miles north). Not far away are Kirk Hill and Mochrum Loch.

Map of Kirkoswald © OpenStreetMap contributors

Common questions in Kirkoswald

Do you come to Kirkoswald?

Yes. We cover the whole UK and travel to Kirkoswald and the rest of South Ayrshire. Send us photos for a fixed quote, or call 0345 017 0787.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Kirkoswald.

Do the materials smell?

There may be a mild smell during the work.

Can I get a quote without a visit?

Generally, yes. Clear photos let us give you a fixed quote without visiting.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

What areas do you cover?

All of South Ayrshire, and the rest of the UK. Travel is included in the price.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths

Landlord and trade work in Kirkoswald

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Kirkoswald use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.

Why Kirkoswald clients choose us

  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • One price list for the whole UK
  • One visit for most repairs

See our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.