Bath and North East Somerset · England
Non-Slip Bath Coating in Limpley Stoke
Non-slip bath coating in Limpley Stoke without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth

Non-slip bath coating at your home in Limpley Stoke
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include bath mats that harbour mould or get forgotten and safety for older or less mobile people, in enamelled baths, wet room floors (ask us) and shower trays.
We stand behind the work with a one-year guarantee, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

- Area
- Limpley Stoke (BA2)
- County
- Bath and North East Somerset
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Also near Limpley Stoke
More services for Limpley Stoke
Limpley Stoke and the surrounding area
Limpley Stoke is about 3 miles south-east of Bath, in Bath and North East Somerset. We travel to homes and businesses in Limpley Stoke, so you don’t need to take anything anywhere. Limpley Stoke is one of 136 towns and villages in Bath and North East Somerset where we work. Our nearest city page is Birmingham, about 80 miles away.
Our repair technicians cover all of the BA2 postcode area. You will find streets such as Lower Stoke, Woods Hill and Middle Stoke. We also cover the places around Limpley Stoke: Freshford (1 mile south-east), Pipehouse (1 mile south-west), Conkwell (1 mile north-east), Monkton Combe (1 mile north-west) and Tucking Mill (1 mile north-west). We also work in nearby towns such as Bath (3 miles north-west), Keynsham (9 miles north-west), Bathwick (3 miles north-west), Walcot (4 miles north-west), Westmoreland (4 miles north-west) and Kingsmead (4 miles north-west).
Local landmarks in Limpley Stoke
Locally, our jobs take us to homes close to Monkton Combe School, Church of St Mary and Freshford Church School. You’ll also find Ralph Allen School (1.3 miles north-west) and The Hop Pole Inn (under half a mile north-west). For rail, the closest station is Freshford station, roughly 0.7 miles south-east of the centre. Further afield, we also cover the area around American Museum and Gardens (2.1 miles north) and Midford Castle (1.4 miles west).
Landlords, agents and businesses in Limpley Stoke
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
What non-slip bath coating costs
Each job gets its own fixed price. These are the things that affect it:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- One picture of the whole bath or shower tray
- Natural light rather than flash
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
How the visit works
We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Common problems we fix in Limpley Stoke
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Questions to ask before you book
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- How long it needs to cure
- Whether they match the colour on site
Questions from Limpley Stoke
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Will I see the coating?
Very little: the treated area looks slightly matt.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Everything repaired in place
- Most jobs done in one visit
- Every repair guaranteed for a year
- Straight answers about what a repair can do
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.

