Monmouthshire · Wales
Non-slip bath & shower coating in Lower Common, Monmouthshire
Non-slip bath coating for Lower Common, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What affects the price in Lower Common
Prices are worked out job by job. The main factors are:
- The colour and finish to match
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Whether we combine several jobs
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the entire bath or shower tray
- The material, if you know it
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
How we handle non-slip bath coating in Lower Common
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on shower trays, acrylic baths and wet room floors (ask us), and the jobs we see most are bath mats that harbour mould or get forgotten and worn-out textured areas.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Lower Common (NP7, NP8)
- Region
- Monmouthshire
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, normally overnight.
How to prepare
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Let us know which floor the room is on
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.
Advice
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Your questions about non-slip bath coating in Lower Common
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover Lower Common?
Yes. We cover the entire UK and come to Lower Common and the rest of Monmouthshire. Send pictures and we will quote, or call 0345 017 0787.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What areas do you cover?
Everywhere in the UK, Lower Common included. There is no extra charge for travel.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Monmouthshire.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- No extra charge for your area
- One-year guarantee on every repair
- Work done at your home or business
- A fixed quote before you book
Read our prices page.
Honest limits
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
Common problems we fix in Lower Common
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Send us a photo if you notice any of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Comparing quotes
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- How soon you can use it again
Landlord and trade work in Lower Common
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Places near Lower Common
More services for Lower Common
Lower Common and nearby
Lower Common is about 3 miles west of Abergavenny, in Monmouthshire. We visit clients in Lower Common, so nothing has to leave your home. Lower Common is one of 115 towns and villages in Monmouthshire we cover. Our nearest city page is Birmingham, about 67 miles away.
Here we cover the NP7 and NP8 postcode area. Streets in the area include Back Road, School Lane and Church Road. If you are just outside Lower Common, we cover Gilwern (1 mile south), Govilon (2 miles south-east), Llanwenarth (2 miles south-east), Cantref (3 miles east) and Grofield (3 miles east). Further out, we also cover Abergavenny (3 miles east), Pen-y-pound (3 miles east), Usk (12 miles south-east), Mardy (4 miles east), Llanbadoc (12 miles south-east) and Raglan (11 miles south-east).
What’s near Lower Common
Typical jobs here are in homes near Gilwern C.P. School, The Corn Exchange Inn and Parish Church of St Elli and the streets around them. The closest station to Lower Common is Abergavenny station, roughly 3.7 miles east. A little further out are Llanwenarth Ultra (1.6 miles south-east) and Battle Tump (under half a mile north-west). Open spaces near Lower Common include Mynydd Llanwenarth and Pwll Gwy-rhoc.
About our accreditations · Every repair comes with a one-year guarantee.
