Gloucestershire · England
Non-slip bath & shower coating in Lower Slaughter, Gloucestershire
Non-slip bath coating across Lower Slaughter and nearby, done in a single visit in most cases.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Landlords, agents and businesses in Lower Slaughter
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
How we handle non-slip bath coating in Lower Slaughter
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our repair technicians work on acrylic baths, resurfaced baths and shower trays, and the jobs we see most are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.
A one-year guarantee comes as standard, so you are covered after the visit. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Lower Slaughter (GL54)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Your questions about non-slip bath coating in Lower Slaughter
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you cover the whole of Gloucestershire?
Across the UK, so Lower Slaughter is covered. Our prices are the same everywhere.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you quote from photos?
Nearly always. If pictures do not show enough, we will ask for another angle.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Repair or replace in Lower Slaughter?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Why choose Surface Doctor in Lower Slaughter
- Everything repaired in place
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
See our pricing.
What we are called out for in Lower Slaughter
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we’re called about are:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Before you book anyone
- A fixed price, and whether VAT is included
- How to look after the finish
- How your room will be protected
- What happens if the damage is worse than the pictures show
Lower Slaughter and nearby
Lower Slaughter is about 12 miles north-west of Carterton, in Gloucestershire. Clients in Lower Slaughter get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Lower Slaughter is one of 470 towns and villages in Gloucestershire where we work. You can also see our page for Birmingham, about 40 miles away.
Postcode districts we cover here: GL54. Jobs here include addresses on Becky Hill, Malthouse Lane and Mill Lane and the roads around them. Neighbouring places we cover include Lower Swell (2 miles north), Stow-on-the-Wold (3 miles north-east), Maugersbury (3 miles north-east), Broadwell (4 miles north-east) and Ganborough (4 miles north). Larger places within reach include Cheltenham (14 miles west), St Paul's (13 miles west), Lansdown (13 miles west), Bishop's Cleeve (13 miles west), Fairview (13 miles west) and Alstone (14 miles west).
Near you in Lower Slaughter
Locally, our jobs take us to homes close to Church of St Mary, Coach And Horses Public House and The Cotswold Academy. Other landmarks nearby include Cotswold Motoring Museum (1.2 miles south) and Moore Cottage Hospital (1 mile south).
What non-slip bath coating costs
You will not pay by the hour. The price depends on:
- Unusual colours or finishes
- How easy the damage is to reach
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The material, if you know it
- The postcode, so we can plan the visit
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
What we can’t put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Resurfaced baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
Nearby places to Lower Slaughter
More services for Lower Slaughter
About our accreditations · Every repair comes with a one-year guarantee.
