Cheshire East · England
Non-slip bath & shower coating in Marton, Cheshire East
Non-slip bath coating in Marton without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why book with us
- No extra charge for your area
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
See our full price list.
Non-slip bath coating in Marton, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, in acrylic baths, wet room floors (ask us) and resurfaced baths.
All our work is covered by our one-year guarantee, wherever you are in Cheshire East. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Marton (SK11)
- County
- Cheshire East
- Warranty
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Marton
Marton is about 3 miles north of Congleton, in Cheshire East. Our technicians come to homes and businesses in Marton, so there is no workshop to go to. We cover 254 places in Cheshire East, from the larger towns to small villages. We work right across the region, from Marton to Manchester (about 18 miles away).
Postcode districts we cover here: SK11. Streets in the area include Oak Lane, Bunce Lane and Congleton Road. Neighbouring places we cover include Hodgehill (2 miles north-west), Siddington Heath (2 miles north-west), Siddington (2 miles north), Gleadsmoss (2 miles west) and Fanshawe (2 miles north). We also work in nearby towns such as Crewe (12 miles south-west), Macclesfield (5 miles north-east), Congleton (3 miles south), Wilmslow (8 miles north), Knutsford (9 miles north-west) and Middlewich (9 miles west).
Around Marton
Typical jobs here are in homes near The Davenport Arms, Marton and District CofE Aided Primary School and St James' and St Paul's Church. For rail, the closest station is Congleton station, about 3.9 miles south. Other landmarks nearby include Parkside Hospital (4.6 miles north-east). The countryside around Marton includes Black Firs Wood Nature Reserve and The Cloud.
Prices and what affects them
There is no charge for travel to Marton. The price depends on:
- Whether we combine several jobs
- The type of damage
- The material
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
Two or three clear pictures are normally enough. Try to include:
- A wider photo showing the entire bath or shower tray
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- One sharp close-up of the damage
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Also in Marton
Questions from Marton
What does non-slip bath coating cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
Landlord and trade work in Marton
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs in Cheshire East and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
The process
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Ask for a price
Send us photos of the damage and one of the whole item, and tell us you are in Marton, and we’ll reply with a fixed price.
Related advice
When to call us in Marton
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Send us a photo if you notice any of these:
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Before booking anyone
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
