Cheshire West and Chester · England

Non-Slip Bath Coating in Mickle Trafford

Non-slip bath coating in Mickle Trafford without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Mickle Trafford homes

What non-slip bath coating costs

You’ll know the full cost before booking. We take into account:

  • The material and finish
  • The size and number of damaged areas
  • Access to the area
  • Unusual colours or finishes

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.

Getting a price from pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • Where you are, by postcode
  • Any earlier repairs or coatings
  • Something in shot to show the size
  • What it’s made of, if you know

The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.

Non-slip bath coating in Mickle Trafford without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We are frequently asked to fix resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, across resurfaced baths, shower trays and enamelled baths.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Mickle Trafford (CH2)
County
Cheshire West and Chester
Cover
A year, on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Questions from Mickle Trafford

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

What happens once I’ve sent photos?

We review the photos and send a fixed quote and the next dates we have.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park

Ask for a price

Email us pictures of the damage and a wider shot of the whole item, with your CH2 postcode, and we will reply with a fixed price.

Send pictures for a quote

Related advice

Covering Mickle Trafford

Mickle Trafford is about 3 miles north-east of Chester, in Cheshire West and Chester. Whether you’re in the middle of Mickle Trafford or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in 224 places in Cheshire West and Chester, from the larger towns to small villages. Our nearest city page is Liverpool, about 13 miles away.

Here we cover the CH2 postcode area. Jobs here include addresses on Wilbraham Close, Barnston Court and Dane Grove. Close by, we cover Plemstall (1 mile east), Bridge Trafford (1 mile north), Hoole Bank (1 mile south-west), Guilden Sutton (1 mile south) and Picton (1 mile north-west). Further out, we also cover Chester (3 miles south-west), Ellesmere Port (5 miles north-west), Winsford (13 miles east), Northwich (13 miles east), Neston (11 miles north-west) and Boughton (3 miles south-west).

Local landmarks in Mickle Trafford

In Mickle Trafford, that means homes near Upton-by-Chester High School, The Hammond and St Peter's Church, among other places. The nearest railway station is Bache station, about 2.7 miles west of the centre. Well-known places in the area include Cheshire Oaks Designer Outlet (3.7 miles north-west) and Countess of Chester Hospital (3 miles west). The countryside around Mickle Trafford includes Gowy Meadows Nature Reserve.

Map of Mickle Trafford © OpenStreetMap contributors

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Mickle Trafford customers choose us

  • We leave the room as we found it
  • Everything repaired in place
  • We come to you, anywhere in the UK
  • Free fixed quotes from pictures

Take a look at our full price list.

What we can’t put right

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)

Signs you need non-slip bath coating in Mickle Trafford

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people

Questions to ask before you book

  • Whether there are any call-out or travel charges
  • How long it needs to cure
  • What happens if the damage is worse than the pictures show
  • Whether the colour is mixed to match

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.