Powys · Wales
Non-slip bath & shower coating in Milford, Powys
Non-slip bath coating in and around Milford: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
Materials we work on in Milford
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
Non-slip bath coating in Milford without replacing anything
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you’re dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Milford (SY16)
- County
- Powys
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Milford
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Before you book anyone
- What prep work is covered
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- Who will actually do the work
Nearby places to Milford
What else we do in Milford
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- One price list for the whole UK
Take a look at our prices page.
About Milford
Milford is about 1 mile west of Y Drenewydd, in Powys. We visit homes and businesses in Milford and nearby villages, so there is no workshop to go to. We cover all 234 towns and villages in Powys. Our nearest city page is Birmingham, about 61 miles away.
Jobs in SY16 work the same way as everywhere else we cover. From Lon Derw, Lon Gwern and Lon Rhosod or a nearby road, a technician can come to you. Other places close to Milford include Trehafren (1 mile south-east), Nantoer (1 mile south), Maesyrhandir (1 mile south-east), Garth Owen (1 mile south-east) and Y Drenewydd (1 mile east). Further out, we also cover Y Trallwng (13 miles north-east), Llanidloes (10 miles south-west), Bron-y-Buckley (13 miles north-east), Cegidfa (15 miles north-east), Montgomery (9 miles north-east) and Llanfair Caereinion (9 miles north).
What’s near Milford
Our clients here include homes close to The Flying Shuttle pub, St Mary's R.C. (A) School and Newtown English Congregational Church and the streets around them. You’ll also find Newtown High School (0.6 miles south-east) and Newtown Free Library (0.8 miles east). The closest station to Milford is Newtown (Powys) station, roughly 0.9 miles east of the centre. A little further out are Brynhyfryd Mound (0.5 miles west) and W H Smith Museum (0.8 miles east). Open spaces near Milford include Trehafren.
- Parks and local facilities nearby include Newtown Central (within half a mile south-east)
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Read more
Milford: your questions answered
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens once I’ve sent photos?
We come back with a fixed quote, normally with dates to choose from. There’s no obligation to book.
Do you come to Milford?
Yes. We cover the entire UK and come to Milford and the rest of Powys. Send photos and we’ll quote, or call 0345 017 0787.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
How much does non-slip bath coating cost in Milford?
We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SY16 postcode.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Prices and what affects them
A fixed quote means you know the cost before you book. We take into account:
- How hard the colour is to match
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Quotes from your pictures
You can take the photos on your phone. Just make sure we can see:
- Your postcode, so we can check dates
- The material, if you know it
- Something in shot to show the size
- Daylight if possible, and no flash reflection
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Landlords, agents and businesses in Milford
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
